Ubiquiti Bullet M2HP Plug and Go 100Mbps+ of REAL TCP/IP Throughput over outdoor multi-km links 2.4GHz Hi Power 802.11N Outdoor Radio System
Ubiquiti POE-24 24VDC 12W is an advanced power supply / power inserter.
The power supply is autoranging on the input and has a regulated voltage output.
It has overload and short circuit protection in addition to Ethernet surge suppression builtin.
The Ubiquiti POE-24 12W is not a proprietary unit.
For all models the power is supplied on ethernet pins 4/5 (V+) and 7/8 (V-).
For the models the power is supplied on ethernet pins 4/5 (V-) and 7/8 (V+).
Ubiquiti POE-24 12W come complete with a standard North American 115VAC power cord.
The power supply can be centrally located where it can be attached to an uninterruptible power supply.
The user has the ability to easily power on reset the attached equipment from a remote location.
L-com HG2424EG-NF 2.4 GHz 24 dBi Lightweight Die-cast Grid Antenna - N-Female Connector
The HyperGain HG2424EG Lightweight series of aluminum die-cast directional parabolic GRID antennas are suitable for outdoor applications in the 2.4GHz ISM band. The "EG" GRIDs are of lighter weight construction and offer very good value in moderately challenging environments. For commercial and professional installations in most applications and in challenging environments, the heavier weight standard HyperGain® HG2424G High Performance GRID is recommended.
This 24dB grid antenna's construction features a die cast aluminum reflector grid for good strength and ease of installation. This antenna's 2-piece reflector grid is simple to assemble and significantly reduces shipping costs. The grid surface is UV powder coated for durability and aesthetics. The open-frame grid design minimizes wind loading. The HG2424EG antenna is supplied with a 60 degree tilt and swivel mast mount kit. This allows installation at various degrees of incline for easy alignment. It can be adjusted up or down from 0° to 60°.
100Mbps+ of REAL TCP/IP Throughput over outdoor multi-km links
No radio card / host board issues
No RF cable quality concerns
No mechanical stability concerns
No enclosure mounting requirements
Just Plug and Go.
Processor Specs: Atheros SOC, MIPS 24 KC, 400MHz
Memory Information: 32MB SDRAM, 8MB Flash
Networking Interface: 1 X 10/100 BASE-TX (Cat. 5, RJ-45) Ethernet Interface
Approvals: FCC Part 15.247, IC RS210, CE
RoHS Compliance: YES
RF Connector: Integrated N-type Male Jack (connects directly to antenna)
Power Method: Passive Power over Ethernet (pairs 4,5+; 7,8 return)
Carrier class power over ethernet system
Auto ranging power supply/ inserter
Built-in ethernet surge protection to prevent equipment damage
Overload and short circuit protection
Minimum cross talk and insertion loss
Advanced switching technology ? runs cool
Powers clients which accept power on unused ethernet pins 4,5,7,8
FCC and CE approved
Current indicator (CI) option available
Remote routers, access points and bridges
Remote networking equipment
IP camera systems
400MHz to 10GHz systems
IP phone systems
Ligthweight Die-Cast aluminum construction
UV stable light gray powder coat finish
8° beam-width & 12 inch coax lead
Easy to assemble
All weather operation