The Intellinet 8-Port Gigabit PoE+ Switch (560856) is designed to pass both data and electrical power to a number of PoE-compatible devices via standard Cat5e or Cat6 network cables. Equipped with eight Gigabit Ethernet ports, this switch can power wireless LAN access points and bridges, VoIP phones, IP video cameras and more while delivering network speeds of up to 1000 Mbps.
The Intellinet 8-Port Gigabit PoE+ Switch supports the IEEE 802.3at protocol and is designed to inject up to 31.5 watts of power per port*. IEEE802.3af- or IEEE802.3at-compliant devices attached to the switch require no additional power, thus eliminating the time and expense of electrical rewiring and minimizing the unsightly clutter caused by power supplies and adapters in awkward places such as ceilings and walls. Any mix of PoE and non-PoE devices is supported, and thanks to its short circuit, overload and high-voltage protection function, your equipment is well-protected. For devices that are not 802.3at/af compliant (legacy wireless access points or network cameras), we suggest the use of an Intellinet PoE/PoE+ Splitter.
More often than not, a network switch does not utilize all its ports at all times. Normally, when a computer, notebook, network printer or other network device is powered down, the switch continues to consume the same amount of power as if it were active. Now, thanks to the new energy efficient IEEE 802.3az technology, the Intellinet 8-Port Gigabit PoE+ Switch detects link status to all connected devices and reduces the power usage of ports not in use. In addition, the Intellinet switch can adjust the level of power output based on the length of the network cable connected to a particular port. With the Intellinet 8-Port Gigabit PoE+ Switch you will enjoy maximum network performance, but when things slow down it automatically scales back power usage to conserve energy and save money.
10/100/1000 auto-sensing ports automatically detect optimal network speeds
IEEE 802.3at/af-compliant RJ45 PoE/PoE+ output ports
Green Ethernet power-saving technology deactivates unused ports and adjusts power levels based on the cable length
Power output up to 31.5 watts on ports 1-2 (IEEE 802.3at) or up to 15.4 watts on ports 1-4 (IEEE 802.3af)
Total power budget of 63 watts
Supports IEEE 802.3at and IEEE 802.3af-compliant PoE devices (wireless access points, VoIP phones, IP cameras)
Supports IEEE 802.3at/af detection and short circuit, overload and high-voltage protection
All RJ45 ports with Auto-MDIX (auto uplink) support
Store and forward switching architecture
IEEE 802.3x flow control for full duplex
Supports up to 8192 MAC address entries
128 kBytes buffer memory
Fanless design ideal for silent operation
Desktop-size metal case