UVC-G3 5 (Units) + UniFi NVR (PRE CONFIGURED/ READY TO INSTALL)
UVC-G3 5-Pack, with indoor and outdoor wall, ceiling, and pole mounting options, the UniFi G3 Series 2MP Outdoor Bullet Camera from Ubiquiti features multiple mounting options for flexible placement. Additionally, the camera uses a ball joint mount which offers 3-axis angle adjustments for capturing various angles of your viewing area. A 1/3" 4MP HDR sensor provides 1920 x 1080 resolution at 30 fps, and a 3.6mm fixed lens enables the camera to cover an 85 horizontal field of view (72 after lens correction). Equipped with integrated IR LEDs, the camera can be used at night, and a mechanical IR cut filter will automatically switch from color to black and white for clear detail at all times.
The camera offers brightness, contrast, sharpness, saturation, and noise reduction image settings for configuration based on different environments, and a built-in microphone allows you to listen to those you are monitoring. An Ethernet port features PoE technology for a minimum of wires during installation, and H.264 compression maximizes your bandwidth for fast data transmission.
The UniFi NVR is a plug-and-play NVR appliance with low power consumption. The UniFi Video software is pre -installed for plug and play deployment. No additional software is required. Plug it into the network, go through the configuration wizard, and it is set up and ready to go.
The UniFi NVR has a built-in 500 GB hard drive. This equates to approximately 1200 recording hours at 480p resolution or 400 recording hours at 720p resolution (numbers can vary depending on the frame rate).
The software features an advanced UI with functions such as custom motion detection zones, event recordings, email alerts, live view monitoring, disk management, and analytics. The UI can be accessed via a web browser on a Windows PC or on an iOS or Android device. It also features detailed statistical reporting, multiple views, versatile camera settings, advanced analytics, and customizable event recordings.
- User interface accessible from a web browser on a Windows system
- Automatic camera detection for easy and quick setup
- Video Web interface is accessible on iOS and Android devices
The TS-8-PRO TOUGHSwitch Pro 8-Port Advanced PoE Controller from Ubiquiti Networks is an industrial-strength, 8-port Gigabit switch with 150W power capability for powering 24V or 48V devices. The output voltage is controlled by the software. It delivers reliable passive PoE and fast 10/100/1000 Mb/s connectivity to attached Ubiquiti devices and other devices that support passive PoE. To connect the PoE devices, you need to enable PoE in the TOUGHSwitch configuration interface. Each port can be individually configured to provide PoE, so that both PoE and non-PoE devices can be connected.
Gigabit Ethernet performance combined with Industrial strength construction and a 150Watt power supply
It is the ideal PoE solution for use with Ubiquiti airMAX base station deployments
UVC-G3 - 5 Units