Intellinet 561167 Web-Managed Switch 8x Gigabit Ports PoE+ with 2x SFP Ports



Save installation time and money with PoE:

  • The Intellinet Network Solutions 561167 8-Port Gigabit Ethernet PoE+ Web-Managed Switch is designed to pass both data and electrical power to a number of PoE-compatible devices via standard Cat5e or Cat6 network cables. Equipped with eight Gigabit Ethernet ports (all of which support 802.3at/af PoE/PoE+), this switch can power wireless LAN access points and bridges, VoIP phones, IP video cameras and more while delivering network speeds of up to 1000 Mbps.

Power over Ethernet 802.3at:

  • The Intellinet Network Solutions 8-Port Gigabit Ethernet PoE+ Web-Managed Switch supports the IEEE 802.3at protocol and is designed to inject up to 30 watts of power per port.* IEEE802.3af- or IEEE802.3at-compliant devices attached to the switch require no additional power, which eliminates the time and expense of electrical rewiring and minimizes the unsightly clutter caused by power supplies and adapters in awkward places like ceilings and walls. Any mix of PoE and non-PoE devices is supported, and thanks to its short circuit, overload and high-voltage protection function, your equipment is well protected. For devices that are not 802.3at/af compliant (legacy wireless access points or network cameras), we suggest the use of an Intellinet Network Solutions PoE/PoE+ Splitter.

Web Management:

  • This PoE switch is equipped with an impressive array of advanced management functions that allow you to be in full control over your network. The 8-Port Gigabit Ethernet PoE+ Web-Managed Switch supports VLAN, port aggregation, QoS and port mirroring, and it supports SNMP V1 and the popular V2c, just to name a few.

Eliminate Bottlenecks with a total of 10 Gigabit Ports:

  • Equipped with eight auto-sensing 10/100/1000 Mbps RJ45 Gigabit Ethernet ports, this switch offers plenty of performance for your computers, servers and other networking devices. In addition, two small, form-factor pluggable GBIC module slots (SFP) provide fiber connectivity for greater distances. These are not shared combo ports, but true Gigabit ports, pushing the total available bandwidth up to 20 Gbps.

* Total PoE budget for this switch is 140 watts. Per-port average power distribution is 17.5 watts; maximum per-port power usage cannot exceed 30 watts.

Technical Description

• Ports
 - Eight 10/100/1000 Mbps RJ45 PoE-enabled ports
 - Two Gigabit SFP slots
 - One console port
MAC address table: 8192 entries
• Buffer memory: 512 kBytes
• Backplane speed: 20 Gbps
• Switch architecture: store and forward
• Peak packet rate: 14.88 Mpps
• MTBF: 259,692 hours
• Cooling
 - One Fan
 - Noise level: 23.5 dB(A) (max.)
• Smart configuration options
 - 802.1x authentication
 - ACL Access Control List
 - Broadcast Storm configuration with broadcast rate, multicast rate, and flooded unicast rate
 - Cable diagnostic
 - DHCP Relay with Option82
 - IGMP Snooping via command line
 - Port link speed: 10 Mbps, 100 Mbps, 1000 Mbps or auto-negotiation
 - Flow control on/off per port
 - LAN settings (IP address, DHCP, Gateway, etc.)
 - MAC address management, learning & aging, MAC filter
 - Ping utility
 - Port Mirroring, one to one or many to one
 - Port Aggregation/LACP: 8 groups
 - Quality of Service (QoS)
 - Link Layer Discovery Protocol (LLDP) - Station and Media Access Control Connectivity

 - Radius server via command line
 - Rate limiting (ingress rate and egress rate)
 - RMON groups (statistic, history, alarm and event)
 - SNMPv1/v2c/v3 (Simple Network Management Protocol)
 - Spanning tree (STP, RSTP, MSTP)
 - TACAS+ via command line
 - Tracert utility
• PoE management features
 - PoE on / off per port
 - PoE mode support per port: AF & AT / AF only
 - Maximum power per port
 - PoE priority per port: Low, medium, high
 - PoE alarm notification via SNMP traps
 - PoE delay start configuration per port
 - PoE restart time configuration per port
 - PoE status monitoring
• Pinout RJ45 output ports (Data + Power)
 - IEEE Alternative A
 - Pin 1: Rx+ (data receive) + Vdc_return (+) (feeding power [+])
 - Pin 2: Rx- (data receive) + Vdc_return (+) (feeding power [+])
 - Pin 3: Tx+ (data transmit) + Vdc (feeding power [-])
 - Pin 6: Tx- (data transmit) + Vdc (feeding power [-])
• Certifications: FCC Class A, CE

• Input: 100 – 240 VAC, 50 – 60 Hz
• Power consumption: 150 watts (maximum)

• Metal housing
• Dimensions: 280 (W) x 180 (L) x 44 (H) [mm] / 11.02 (W) x 7.09 (L) x 1.73 (H) [in.]
• Weight: 1.6 kg (3.5 lbs.)
• Operating temperature: 0 – 45°C (32 – 113°F)
• Operating humidity: 10 – 90% RH, non-condensing
• Storage temperature: -10 – 70°C (14 – 158°F)

Package Contents:
• 8-Port Gigabit Ethernet PoE+ Web-Managed Switch with 2 SFP Ports
• 19' rackmount brackets
• Power cable
• Instructions

More Information