Tycon Power Systems unique POE/Solar charge controllers with built-in POE Inserter have dual inputs to charge batteries from a POE source and also a secondary source like solar panels in order to provide redundancy and insure 100% uptime for critical applications.
The solar panel takes priority so that when the sun is shining the grid power usage is minimized. They have a built in POE inserters and the 12V battery model has integral DC to DC converter that delivers 12V, 18V, 24V or 48V at the POE port. They have full electronic protections for short circuit, reverse current, over-voltage, over-charge and over-discharge. They control the battery charging current to prevent battery damage from overcharging.
The built-in over-discharge protection and low self consumption ensures the battery is not over-discharged, which greatly increases the life of the batteries. The load is turned off when 12V battery voltage reaches 11V and turns back on automatically when battery voltage reaches 12V.
They have five LED indicators to give a quick visual status if current is being supplied by a POE source or solar panel, if battery is charging, If load output is turned on and a warning if battery is connected with reverse polarity.
Solar and Battery Connections are via 4 screw terminals for wire size up to 12AWG. POE Input and Output is via 2 RJ45 shielded connectors. There is a secondary voltage output connector on the back with 5 screw terminals for connecting other electronics to the controller using up to 12AWG wire. The controllers are externally fused with a standard replaceable fuse.
There is also a 24V model available for 24V battery systems. The POE output is fixed at 24V.
Dual Input - Charges 12V or 24V Batteries from
Solar Panel and / or Passive POE
Built in DC to DC converter with various
Passive POE output voltages available:
Compact and high temperature operation
Low self consumption < 0.5W
Remote Power Systems; Surveillance, Sensors
Wireless Stations ; AP / Client / Repeaters
UPS Systems ; Lighting, Fences, Gates