Tycon Power TPW-400N-24 400W 24V HAWT Wind Turbine with battery charge controller
The TPW Series Wind Turbines from Tycon Power Systems are lightweight at less than 10.5kg and are designed for ease of installation and long service life.
The generator is a very low cogging force design for better performance in light winds and is packaged in a fully sealed die cast anodized aluminum enclosure.
There are no brushes to wear out or cause electrical noise and the bearings are sealed so the system is maintenance free.
The blades are glass reinforced polypropylene for high strength, UV resistance and fatigue resistance.
The 200W turbines are available in a 12V 20A model and a 24V 10A model.
The 400W turbine is available in a 24V 20A model.
The permanent magnets used are Neodymium Iron Boron (NdFeB) for higher power output.
Mounting is to the top of a 51mm (2inch) OD standard pole. The mount system is a vibration isolation type to minimize vibrations being carried down the mounting pole. The hardware used is stainless steel for corrosion protection.
Now includes a battery charging controller to prevent battery over-charge and over-discharge. Controller supports a dump load if desired but connecting a dump load is not a requirement with this system. Controller can be used in conjunction with a solar controller to create a hybrid power system
Wind Turbine startup wind speed of 2.1m/s (4.5mph)
Smooth and quiet running maintenance free sealed turbine
Sealed die cast aluminum housing for protection from harsh environments