PRODUCT SPECIFICATIONS
DAG1000-2S is a multi-functional analog telephone adapter which offers seamless connectivity between IP-based telephony networks and legacy telephones (POTS), fax machines and PBX systems.
The device provides 2 FXS ports, fax over IP and a built-in high-speed NAT router. These powerful features and good voice quality make the device ideal for personal use and suitable for various application environments such as SOHO and small enterprises. Moreover, with automatic provisioning and centralized management system, the device is easy for maintenance and deployment.
Features
Cost-effective ATA with 2 FXS ports
Fax over IP (T.38 and Pass-Through)
Support IPv4 and IPv6
TR069 and SNMP
Elastix and Broadsoft Certification
Multiple codecs: G.711A/U, G.723.1, G.729A/B, G.726
Fully compatible with leading IMS/NGN and SIP-based IP telephony systems
Physical Interfaces
Telephone Port
DAG1000-2S: 2 FXS port (RJ11)
Ethernet Interfaces
DAG1000-2S:
1 WAN, 10/100Mbps (RJ45)
1 LAN, 10/100Mbps (RJ45)
Voice Capabilities & Fax
Codecs: G.711a/μ law, G.723.1, G.729A/B, G.726
Silence Suppression
Comfort Noise Generator(CNG)
Voice Activity Detection(VAD)
Echo Cancellation: G.168 with up to 128ms
Adaptive (Dynamic) Jitter Buffer
Hook Flash
Adjustable Gain Control
Programmable Gain Control
FAX: T.38 and Pass-through
Modem/POS
DTMF: SIP Info/RFC2833/Inband
VLAN 802.1P/802.1Q
Layer 3 QoS and DiffServ
FXS
FXS Connector: RJ11
Dial Mode: DTMF and Pulse
Pulse: 10 and 20 PPS
Caller ID: DTMF/FSK CLI Presentation
Max Cable Length: 3km
Reversed Polarity
Programmable Call Progress Tone
Software Features
Hunting Group
Web ACL
Telnet ACL
Action URL
PPPoE/IPv4/IPv6
Digitmap
Bandwidth Optimization
Routing Rules based on Prefixes
Caller/Called Number Manipulation
Supplementary Services
Call Waiting and Call Holding
Call Forwarding(Unconditional/Busy/No Reply)
Call Transfer (Blind & Attended)
Warm/Immediately Hotline
Do-not-disturb
Three Parties Conversation (3-way Conference)
Message Waiting Indicator
Environmental
Power Supply: 12V DC, 1A
Power Consumption: <5W
Operating Temperature: 0 ºC ~ 45 ºC
Storage Temperature: -20 ºC ~ 80 ºC
Humidity: 10% - 90% (Non-Condensing)
Dimensions:126×76×25mm(W/D/H)
Unit Weight:<=0.2kg
Compliance: UL
Maintenance
SNMP V1/V2/V3
TR069
Auto Provisioning (HTTP/FTP/TFTP)
Web/Telnet
Configuration Backup/Restore
Firmware Upgrade via Web
CDR
Syslog
Ping, Tracert Test
Network Capture
Outward Test (GR909 Standard)
NTP/Daylight Saving Time
IVR Local Maintenance
Cloud-based Management