PRODUCT SPECIFICATIONS
Intellinet 750899 OM4 LC/UPC to LC/UPC Duplex Fiber Patch Cable, 5 m
The Intellinet 750899 is a 5-meter multimode fiber patch cable for connecting compatible optical equipment and fiber termination points. It combines OM4 50/125 µm fiber with duplex LC/UPC connectors at both ends.
Designed for equipment patching in network racks, telecommunications rooms and data centers, the cable features a violet Low Smoke Zero Halogen jacket. Its duplex construction provides two fiber paths for connections that use separate transmit and receive fibers.
Key Features
- 5 m length, approximately 16.4 ft.
- OM4 multimode fiber with a 50 µm core and 125 µm cladding.
- Duplex LC/UPC connectors at both ends.
- Ceramic ferrules with Ultra Physical Contact polishing.
- Violet LSZH jacket with a listed 3.0 mm outside diameter.
- Passive optical connection requiring no separate power supply.
OM4 Multimode Connectivity
Use the cable with optical interfaces that specify compatible 50/125 µm multimode fiber and LC/UPC connections. The operating speed and supported link distance depend on the transceivers, equipment and complete optical path.
This patch cable does not convert between multimode and single-mode fiber, connector types or optical standards.
Duplex LC/UPC Connections
Each end provides two LC connections for duplex optical links. Maintain the correct transmit-to-receive polarity across the complete connection and inspect and clean connector end faces before mating.
LSZH Jacket
The Low Smoke Zero Halogen jacket provides an alternative to conventional jacket materials where LSZH construction is specified. Confirm the installation's required fire classification separately; LSZH alone does not establish a plenum, riser or outdoor rating.
Ideal Applications
- Multimode optical transceiver connections in network racks.
- LC fiber patch-panel and equipment interconnections.
- Data center and telecommunications-room patching.
- Compatible duplex multimode Ethernet links.
Compatible Products
Compatibility requires duplex LC/UPC optical interfaces and support for OM4 50/125 µm multimode fiber. Both ends of the link must use compatible optical standards, wavelengths and data rates. The complete optical path must remain within the transceivers' distance and loss budgets.
- MikroTik S+85DLC03D 850 nm Multimode SFP+ Transceiver – Use with a compatible host port and matching remote optical interface, maintaining correct transmit/receive polarity and the module's specified link limits.
Important: Do not substitute this cable for single-mode OS2 fiber, LC/APC connections, SC connections or MPO/MTP cabling. A matching connector shape alone does not establish optical compatibility.
Technical Specifications
General
- Manufacturer / Brand: Intellinet Network Solutions
- Model / MPN: 750899
- Product Type: Duplex multimode fiber optic patch cable
- Length: 5 m (approximately 16.4 ft.)
Fiber and Connectors
- Fiber Category: OM4
- Fiber Mode: Multimode
- Core Diameter: 50 µm
- Cladding Diameter: 125 µm
- Configuration: Duplex, two fibers
- Connector End A: Duplex LC/UPC
- Connector End B: Duplex LC/UPC
- Ferrule Material: Ceramic
- Polish: UPC, Ultra Physical Contact
Optical Specifications
- Published Insertion Loss: ≤ 0.25 dB
- Published Return Loss: ≥ 35 dB
- Link Speed and Reach: Determined by compatible optics and the complete channel
Jacket and Physical Specifications
- Jacket Material: LSZH, Low Smoke Zero Halogen
- Jacket Color: Violet
- Listed Jacket Outside Diameter: 3.0 mm
- Manufacturer-Listed Bending Radius: 15 mm
Environmental
- Operating Temperature: -40°C to +75°C (-40°F to +167°F)
Download Intellinet 750899 OM4 LC/UPC Duplex Fiber Patch Cable Datasheet (PDF)