website@flyteccomputers.com

L-com

Part:
ANF-3700

L-com ANF-3700 Type N Female Bulkhead Crimp Connector, 50 Ohm, DC–3 GHz, for RG58 and 195-Series Coax

$3.27
$19.95
Condition:
New

PRODUCT SPECIFICATIONS

L-com ANF-3700 Type N Female Bulkhead Crimp Connector

The L-com ANF-3700 is a straight, 50-ohm Type N female coaxial connector with a crimp cable termination and bulkhead mounting design. It is designed for building RF cable assemblies using RG58 and selected 195-series coaxial cables.

The connector provides a panel-mounted RF connection for antenna pigtails, equipment enclosures and other coaxial installations. Its specified operating range is DC to 3 GHz. A nut, lock washer and O-ring are provided for securing the connector to a bulkhead.

Key Features

  • Standard-polarity Type N female interface.
  • 50-ohm impedance.
  • Specified frequency range of DC to 3 GHz.
  • Straight body with bulkhead mounting.
  • Crimp termination for supported coaxial cables.
  • Nut, lock washer and O-ring for bulkhead installation.

Coaxial Cable Compatibility

L-com lists RG58, RG141, RG142, CA-195, WBC195, LMR195, Belden 8240 and Belden 8219 as compatible cable types. Use the manufacturer's cable-preparation dimensions and appropriate termination tooling for the selected cable.

Bulkhead Installation

The bulkhead design supports installation through an equipment panel or enclosure wall. Verify the mounting-hole dimensions, available panel thickness and internal cable clearance before installation.

RF Performance Limits

Keep the application within the connector's DC-to-3 GHz specification. The connector does not increase antenna gain, transmitter output or network speed. Complete assembly performance also depends on cable loss, termination quality and the connected equipment.

Ideal Applications

  • Panel-mounted RF connections within DC to 3 GHz.
  • Custom antenna pigtail construction.
  • Repair of supported coaxial cable assemblies.
  • Equipment-enclosure antenna feed connections.

Compatible Products

L-com explicitly identifies the following coaxial cable types for termination with the ANF-3700:

  • RG58
  • RG141
  • RG142
  • L-com CA-195
  • WBC195
  • LMR195
  • Belden 8240
  • Belden 8219

The mating RF connection requires a standard-polarity, 50-ohm Type N male interface. The complete installation must remain within the connector's DC-to-3 GHz rating and the applicable cable and equipment limits.

Important: Cable compatibility refers to terminating the supported cable with this connector. It does not establish compatibility with every cable of a similar diameter or every product carrying an N connector. Verify the exact cable construction, preparation dimensions, tooling and RF requirements.

Frequency limitation: Do not select this connector for 5 GHz or 6 GHz installations based on generic Wi-Fi application descriptions.

Technical Specifications

General

  • Brand / Manufacturer: L-com
  • Model / MPN: ANF-3700
  • Product Type: RF coaxial cable connector

RF Interface

  • Connector Series: Type N
  • Gender: Female
  • Polarity: Standard
  • Impedance: 50 ohms
  • Minimum Frequency: DC
  • Maximum Frequency: 3 GHz

Termination and Mounting

  • Body Style: Straight
  • Cable Attachment: Crimp
  • Mounting Method: Bulkhead
  • Mounting Hardware: Nut, lock washer and O-ring

Supported Cable Types

  • RG58, RG141 and RG142
  • L-com CA-195
  • WBC195 and LMR195
  • Belden 8240 and Belden 8219

Download L-com ANF-3700 Connector 2D Drawing (PDF)

More Information

MFRPartNum:
ANF-3700