PRODUCT SPECIFICATIONS
Iuron ANT5158D23A 5 GHz 23.5 dBi Outdoor Grid Antenna
The Iuron ANT5158D23A is an outdoor directional grid antenna designed for wireless links operating from 5.15 to 5.85 GHz. With a specified gain of 23.5 dBi, it is suitable for point-to-point bridges, wireless backhaul and directional client installations using an external radio.
Its grid reflector focuses RF energy toward the remote location. The antenna supports vertical or horizontal polarization, selected during installation, and provides an N-female RF connector for connection to suitable radio equipment.
Key Features
- Operating frequency range of 5.15–5.85 GHz.
- Specified antenna gain of 23.5 dBi.
- Directional grid reflector for focused wireless links.
- Vertical or horizontal polarization.
- N-female RF connector with 50-ohm nominal impedance.
- Two-piece die-cast aluminum construction.
- UV-stable light-gray powder-coated finish.
Directional RF Performance
The ANT5158D23A is intended for installations where the antenna can be aimed toward a specific remote site. Link performance depends on accurate alignment, matching polarization, path clearance, interference and the selected radios.
In a point-to-multipoint network, this antenna can serve a directional client connection aimed at the base station. Its focused pattern is not intended to provide omnidirectional or wide-sector coverage.
RF Connectivity
The N-female antenna connector requires a mating N-male connection. Select a 50-ohm RF cable or adapter arrangement rated for the operating frequency, with the correct radio-side connector and acceptable cable loss.
The antenna is passive and requires an external radio. Ethernet connectivity, wireless protocols and radio power requirements depend on that separately selected equipment.
Outdoor Design
The two-piece aluminum grid and UV-stable coating are intended for outdoor installations. Weatherproof exposed RF connections and verify that the mounting arrangement is appropriate for the installation site.
Ideal Applications
- Point-to-point wireless bridges.
- Building-to-building network links with suitable line of sight.
- Directional WISP client connections.
- Wireless backhaul within the specified frequency range.
Compatible Products
The Iuron ANT5158D23A requires an external radio supporting the selected operating channel within 5.15–5.85 GHz, a 50-ohm antenna interface and a suitable single-polarization antenna configuration.
Verify the radio's antenna requirements, RF output power, connector arrangement and permitted antenna gain before choosing equipment. The RF connection must provide an N-male interface at the antenna.
Important: Vertical or horizontal polarization describes alternative installation orientations. It does not establish simultaneous dual-polarization operation or provide both antenna paths required by a dual-chain MIMO radio.
Technical Specifications
General
- Manufacturer / Brand: Iuron.
- Model / SKU: ANT5158D23A.
- Product Type: Passive outdoor directional grid antenna.
- Applications: Wireless bridges, backhaul and directional client links.
Antenna and RF Interface
- Frequency Range: 5.15–5.85 GHz (5150–5850 MHz).
- Specified Gain: 23.5 dBi.
- Polarization: Vertical or horizontal.
- Nominal Impedance: 50 ohms.
- RF Connector: N-female.
Physical Specifications
- Reflector Material: Die-cast aluminum.
- Construction: Two-piece grid design.
- Finish: UV-stable light-gray powder coating.
- Published Size: 300 x 400 mm; depth not specified.
- Published Weight: 1.4 kg.
- Mechanical Tilt Adjustment: -15° to +15°.
Environmental
- Operating Temperature: -45 to +65 °C.
- Intended Environment: Outdoor.
