PRODUCT SPECIFICATIONS
Orientek TP11P-20mW Fiber Optic Visual Fault Locator
The Orientek TP11P-20mW is a pen-style visual fault locator for fiber tracing and visual troubleshooting. This 20 mW version uses a 650 nm red laser to help technicians identify fiber paths and locate faults where light escapes from the fiber.
Continuous-wave and pulsed operation provide steady or flashing illumination during inspection. Its portable format makes it convenient for fiber installation, patching and maintenance work.
Key Features
- 20 mW output version.
- 650 nm visible red laser.
- Continuous-wave and pulsed operating modes.
- 2.5 mm universal interface for FC, SC and ST connectors.
- LC connection available with an optional 1.25 mm adapter.
- Compact pen-style design.
Visual Fiber Troubleshooting
Use the visible light source to help trace a fiber and inspect accessible sections for light leakage. Whether a fault is visible depends on the cable jacket, fault location, optical losses and ambient lighting.
This VFL provides visual indications. It does not measure insertion loss, certify link performance or calculate distance to a fault.
Connector Interface
The standard interface accepts supported 2.5 mm FC, SC and ST ferrules. LC connectors require the optional 1.25 mm adapter; direct LC connection is not provided by the standard port.
Laser Safety: Never look into the laser output, a connected fiber end or an optical connector while the source is operating. Do not use optical magnification to inspect an energized fiber.
Ideal Applications
- Fiber identification during installation and patching.
- Visual continuity checks on disconnected fiber links.
- Inspection of accessible fiber sections for visible light leakage.
- FTTH and structured fiber cabling maintenance.
Compatible Products
The standard 2.5 mm universal interface supports FC, SC and ST fiber connectors. LC connectors require a suitable optional 1.25 mm adapter.
- FC, SC and ST fiber terminations: Supported through the standard 2.5 mm interface, subject to connector and ferrule suitability.
- LC fiber terminations: Supported only with the appropriate optional 1.25 mm adapter.
Important: The listed connector families do not establish universal support for every connector polish or mechanical configuration. Confirm APC/UPC requirements and adapter suitability before connection.
Use on disconnected fiber under test. Do not inject the laser into active transceivers, ONTs, OLTs or other optical equipment unless the equipment manufacturer expressly permits that test method.
Technical Specifications
General
- Brand: Orientek.
- Flytec SKU / Listed MPN: TP11P-20mW.
- Manufacturer Product Family: T11P.
- Product Type: Pen-style visual fault locator.
Optical Specifications
- Output Power Version: 20 mW.
- Output Wavelength: 650 nm.
- Laser Type: FP-LD.
- Operating Modes: Continuous wave and pulsed.
- Pulse Frequency: 2 Hz.
Optical Interface
- Standard Interface: 2.5 mm universal for FC, SC and ST.
- LC Connection: Optional 1.25 mm adapter required.
Power
- Battery Type: Two AA batteries
Physical Specifications
- Published Dimensions: 180 × 24 mm.
- Published Weight: 80 g.
Environmental
- Operating Temperature: -20 to +50°C
- Storage Temperature: -20 to +50°C.
Download Orientek T11P Visual Fault Locator Datasheet for TP11P-20mW (PDF)