null

Tycon Power Systems

Part:
TPBAT12-10-L

Tycon 12V 10AH Non-Spillable LiFePO4 Sealed Lithium Battery

$129.95
Condition:
New

PRODUCT SPECIFICATIONS

The TPBAT12-10-L LFP (LiFePO4) battery is a high reliability drop-in replacement for comparable Lead Acid batteries. It provides >4000 discharge cycles @ 80% discharge, about 20x what a Sealed Lead Acid battery typically provides. It also provides almost 2x usable energy storage over lead acid batteries with the same Ah rating.

The integrated battery management system (BMS) handles all charging and discharging regulation so that the battery can be charged using the same solar or grid connect chargers used for Lead Acid batteries. Along with its standard mechanical size, the integrated BMS allows the battery to be a true drop-in replacement for a similar sized Lead Acid battery.

The LiFePO4 chemistry is very stable and minimizes the risk of explosion or combustion due to impact, overcharging or short circuit. The 40% less weight and the integrated carrying handles make the battery easier to transport and install at remote sites. Up to 4 batteries can be connected in series or parallel to achieve a higher battery bank voltage (series) or more energy storage (parallel).

There are two F2 spade terminals for connecting battery cables. For long term storage it is recommended to charge to 60% charge every 6 months.

Features

  • Longer Cycle Life: Up to 20x over Lead Acid
  • Less weight: ~40% less than Lead Acid
  • Higher Power: 2x more Watt Hours than Lead Acid
  • Stable and Safe Lithium Iron Phosphate (LiFePO4)
  • On Board Battery Management (BMS)
  • Size is same as comparable Lead Acid Battery
  • Drop in Replacement for Lead Acid Battery
  • Integrated Carrying Handles

Applications

  • Remote Power Systems
  • Off-Grid Systems
  • Lighting
  • Backup Power Systems
  • Wheel Chairs, Golf Carts, Scooters
  • RV and Boat

Dimensions (LxWxH)

  • 5.95 x 2.56 x 3.9”
  • (151 x 65 x 99mm)

Weight

  • 2.2lb
  • (1kg)

Technical Description

  • Nominal Voltage: 12.8V
  • Nominal Capacity: 10Ah 128Wh
  • Internal Resistance: <30mOhms
  • Cycle Life: >4000 Cycles @ 80% DOD
  • Self Discharge: <3% per month
  • Charge Voltage: 14.6 +/-0.2V
  • Charge Current: 2A Recommended, 9A Max
  • BMS Charge Cutoff Voltage: 14.6 +/- 0.2V
  • Typical Discharge Current: 10A Max
  • Peak Discharge Current: 30A for < 3 seconds
  • BMS Discharge Cutoff Voltage: 10V
  • Charge Temperature: 0 to 55C (32 to 131F)
  • Discharge Temperature: -20 to 60C (-4 to 113F)
  • Suggested Storage Temperature: -20 to 45C (-4 to 113F)
  • Weatherproofing: IP65
  • Case: ABS
  • Terminal: F2 (0.25” Spade Terminal)
  • Parallel or Serial Connections: 4 batteries maximum serial or parallel
  • Shipping Class: Class 9 – Hazardous Materials
  • Certifications: UN38.3

More Information

MFRPartNum:
TPBAT12-10-L
Datasheet: