Ubiquiti Wave-AP-Gen2 60GHz PtMP Base Station 2.5GbE + 10G SFP+ 90° Sector 5.4Gbps 31 Clients

Ubiquiti Wave-AP-Gen2

60 GHz + 5 GHz multipoint base station featuring 90-degree sectoral coverage, 31-client capacity, 2.7 Gbps symmetrical speed, and antenna connectors for 5 GHz range extension.

Key Features

• Supported clients count 31
• Hinge arm mounting
• Status LED
• Grounding stud
• GPS sync
• Integrated GPS and Bluetooth
• Reset button
• Drain hole

Technical Specification

• Mechanical:
  • Dimensions: 158.3 x 286.8 x 100.2 mm (6.2 x 11.3 x 3.9')
  • Weight: 1.5 kg (3.3 lb)
  • Enclosure material: UV stabilized polycarbonate, aluminum alloy
  • Pole mount diameter: 25.4 to 60 mm (1 to 2.4') on pipe outer diameter
  • Wind loading: 109.8 N at 200 km/h (25 lbf at 125 mph)
  • Weatherproofing: IPX6
• Hardware:
  • Processor: Quad-core ARM® Cortex®-A53 at 1.4 GHz
  • Memory: DDR3L 512 MB
  • Networking interface:
    • (1) 2.5 GbE RJ45 port
    • (1) 10G SFP+ port
  • Max. power consumption: 24W
  • Power method:
    • Passive PoE 4-pairs (1, 2+; 3, 6-) (4, 5+; 7, 8-)
    • Passive PoE 2-pairs (4, 5+; 7, 8-), for 44–54V DC only
  • Power supply: 48V DC, 0.65A 2.5 GbE PoE adapter (Included)
  • Supported voltage range:
    • 44–54V DC
    • 22–27V DC
  • GPS: Yes
  • Button: Factory reset
  • LEDs: Power, Ethernet, GPS
  • Ambient operating temperature: -40 to 60° C (-40 to 140° F)
  • Ambient operating humidity: 5 to 95% noncondensing
  • Certification: FCC, IC, CE
• Software:
  • Operating mode: PtMP access point
  • Ubiquiti specific features: Wave AI, discovery protocol
  • Services: UISP, ping watchdog, NTP client, SNMP
  • Tools: Antenna alignment, discovery utility, ping, trace route, speed test, cable test, site survey
  • Network: Bridge mode
  • Application requirements:
    • UISP: Version 2.4.205 and later
• System:
  • Total throughput: 5.4 Gbps
  • Supported clients count: 31
  • Max. range:
    • Connecting to a Wave Pro: up to 6 km
    • Connecting to a Wave Long-Range: up to 6 km
    • Connecting to a Wave Nano: up to 4 km
    • Connecting to a Wave Pico: up to 0.9 km
  • Encryption: WPA2-PSK (AES)
• RF:
  • Operating frequency*: 57–71 GHz
  • Channel bandwidth: 2160, 1080, 540 MHz, 58320, 59400, 60480, 61560, 62640, 63720, 64800, 65880, 66960, 68040, 69120, 70200, 70560 MHz
  • Modulation: 16QAM, QPSK
  • Antenna gain: 20 dBi
  • Polarization: Vertically linear
  • Beamwidth:
    • Azimuth: 3 dB 90°
    • Elevation: 3 dB 7°
    • Electrical downtilt: 0°
• Back-Up RF:
  • WiFi standard: 802.11ax (WiFi 6)
  • Operating frequency:
    • US/CA:
      • U-NII-1 5150 - 5250 MHz
      • U-NII-2A 5250 - 5350 MHz
      • U-NII-2C 5470 - 5725 MHz
      • U-NII-3 5725 - 5850 MHz
    • Worldwide:
      • 5150 - 5875 MHz
  • Channel bandwidth: 20, 40, 80 MHz
  • Modulation: BPSK (1⁄2), QPSK (1⁄2), QPSK (3⁄4), 16QAM (1⁄2), 16QAM (3⁄4), 64QAM (2⁄3), 64QAM (3⁄4), 64QAM (5⁄6), 256QAM (3⁄4), 256QAM (5⁄6), 1024QAM (3⁄4), 1024QAM (5⁄6)
  • Antenna gain: 13 dBi
  • Cross-pol isolation: 18 dB
  • Polarization: Dual-linear
  • Beamwidth:
    • Azimuth: 6 dB 95°
    • Elevation: 6 dB 25°
    • Electric downtilt: 0
• LEDs:
  • Power:
    • Flashing white: bootup in progress
    • White: not connected to UISP application
    • Blue: connected to UISP application
    • Flashing blue: locate in progress
    • Blue/white: firmware upgrade in progress
  • Ethernet:
    • Flashing white: Ethernet traffic detected
    • Flashing blue: SFP+ traffic detected
  • GPS: Blue: receiving at least (4) GPS satellite signal