PRODUCT SPECIFICATIONS
C-Data FD1204S-B0 4-Port EPON OLT with 10G SFP+ Uplinks
The C-Data FD1204S-B0 is a 1U rack-mounted optical line terminal for EPON fiber access networks. It provides four EPON ports, four Gigabit combo uplinks and two 10G SFP+ uplinks for connecting the access network to upstream Ethernet infrastructure.
Each EPON port supports a maximum 1:64 split ratio, with a documented system capacity of up to 256 EPON terminals. Actual deployment capacity and reach depend on compatible ONUs, optical modules, fiber losses, service profiles and bandwidth planning.
Key Features
- Four IEEE 802.3ah EPON ports using SFP slots.
- Two 10G SFP+ uplink interfaces.
- Four Gigabit combo uplinks with copper and SFP connection options.
- Maximum split ratio of 1:64 per EPON port.
- Support for up to 256 EPON terminals across the system.
- Dynamic Bandwidth Allocation and ONU authorization functions.
- VLAN, QoS, ACL, RSTP and multicast management features.
- Static routing, RIP, DHCP relay and VLAN interface configuration.
- CLI, web, SNMP, Telnet and SSH management.
- Compact 1U, 19-inch rack format.
EPON Access Technology
The PON interfaces use EPON technology with a documented symmetrical optical line rate of 1.25 Gbps. The specified optical arrangement transmits downstream at 1490 nm and receives upstream at 1310 nm over single-mode fiber.
Gigabit and 10G Uplinks
Four Gigabit combo uplinks provide 10/100/1000 Mbps copper interfaces and corresponding Gigabit SFP alternatives. These are shared combo interfaces, rather than eight independent Gigabit uplinks.
Two additional SFP+ slots provide 10G uplink connectivity. Uplink wavelength, connector, fiber type and distance depend on the compatible transceivers installed.
Switching, Routing and Service Control
The FD1204S-B0 supports VLAN handling, port isolation, access control and traffic prioritization for multi-service access networks. Documented Layer 3 functions include static routing, RIP, DHCP relay and VLAN interface configuration.
EPON management functions include Dynamic Bandwidth Allocation, ONU authorization, discovery, link detection and remote ONU software upgrades where supported.
Network Management
Administrators can use CLI, web, SNMP, Telnet or SSH management. The chassis includes a separate out-of-band Ethernet management interface, a console interface and one USB interface.
Power Configuration
Manufacturer documentation lists AC and -48V-class DC power configurations, with battery backup and redundant power arrangements available through ordering options.
Ideal Applications
- EPON-based FTTH and FTTP access networks.
- Service-provider access aggregation.
- Enterprise or campus fiber distribution using compatible EPON ONUs.
- Video surveillance transport over a properly designed EPON network.
Compatible Products
The FD1204S-B0 requires compatible IEEE 802.3ah EPON ONUs and EPON OLT optical modules. Verify ONU firmware, registration and authentication methods, OAM implementation, service profiles and the optical budget before deployment.
- EPON ONU equipment: Use models validated for this OLT and its installed firmware.
- EPON OLT optical modules: Use modules specifically supported by the FD1204S-B0. A standard Ethernet SFP or an ONU-side PON module is not an interchangeable substitute.
- Ethernet uplink modules: Select supported Gigabit SFP or 10G SFP+ modules for the corresponding uplink slots, matching the remote optic, fiber type and optical budget.
- Intellinet 318921 Cat5e UTP RJ45 Patch Cable, 1 m – Suitable for a short data connection through a 10/100/1000 Mbps copper uplink, within the documented cable and port requirements.
Important: This is an EPON OLT. GPON-only ONUs are not direct substitutes. A dual-mode XPON ONU must support EPON operation and be verified with this OLT's firmware and provisioning requirements.
Important: The PON and Ethernet uplink slots have different functions. Physical SFP fit does not establish electrical, optical or protocol compatibility.
Important: Use the connector polish required by the installed optical module. Do not directly mate SC/APC and SC/UPC connectors.
Technical Specifications
General
- Brand: C-Data
- Model / MPN: FD1204S-B0
- Product Type: EPON optical line terminal
- Chassis: 1U, 19-inch rack-mounted
EPON Interfaces
- PON Port Count: Four
- Physical Interfaces: SFP slots for supported EPON OLT modules
- PON Standard: IEEE 802.3ah EPON
- Documented Optical Line Rate: Symmetrical 1.25 Gbps per PON port
- Maximum Split Ratio: 1:64 per PON port
- Maximum Documented System Capacity: 256 EPON terminals
- Specified Maximum Reach: 20 km, subject to optical module and link-budget requirements
Documented PON Optical Configuration
- Downstream Transmit Wavelength: 1490 nm
- Upstream Receive Wavelength: 1310 nm
- Fiber: 9/125 µm single-mode
- Optical Connector: SC/UPC in the V2.0 specification
- Receiver Sensitivity: -27 dBm for the documented PON configuration
- Receiver Saturation Level: -6 dBm for the documented PON configuration
Uplink Interfaces
- Gigabit Combo Uplinks: Four shared copper/SFP interfaces
- Copper Connections: Four 10/100/1000 Mbps auto-negotiating RJ45 ports
- Gigabit Optical Alternatives: Four SFP slots associated with the combo interfaces
- 10G Uplinks: Two SFP+ slots
Management Interfaces
- Out-of-Band Ethernet: One 100/1000BASE-T management port
- Local Management: One console port
- USB: One interface
- Management Methods: CLI, SNMP, Telnet, SSH and web
Switching and Routing
- Backplane Bandwidth: 58 Gbps
- VLAN: Port/protocol VLAN, tagging, untagging and transparent transmission
- Documented VLAN Capacity: 4096
- Layer 2 Features: RSTP, port isolation, storm control and link aggregation
- Multicast: IGMP snooping and IGMP proxy
- QoS: Classification based on port, VLAN ID, ToS and MAC address
- Layer 3 Features: Static routing, RIP, DHCP relay and VLAN interfaces
EPON Management
- Dynamic Bandwidth Allocation.
- ONU authorization and automatic discovery.
- Link detection and supported remote ONU software upgrades.
- Port-based rate limitation and bandwidth control.
- OAM-based ONU management.
Power Options
- Documented AC Configuration: 100–240V AC, 50/60 Hz
- Documented DC Configuration: Nominal -48V DC; listed range -40V to -72V DC
- Maximum Power: 60W, according to the V2.0 specification
Physical and Environmental
- Dimensions: 440 × 230 × 44 mm
- Listed Weight: 4 kg
- Operating Temperature: -15°C to +50°C
- Storage Temperature: -40°C to +85°C
- Relative Humidity: 5%–90%, non-condensing
Download C-Data FD1204S-B0 4-Port EPON OLT Datasheet V2.0 (PDF)