null

website@flyteccomputers.com

Cambium Networks

Part:
C050910C131A

Cambium Networks ePMP Force 300 13L 5 GHz Subscriber Module 400 Mbps,PoE MIMO IP55 Outdoor Connectivity

$112.71
Condition:
New

PRODUCT SPECIFICATIONS

Cambium Networks C050910C131A 5 GHz Subscriber Module 

Wireless service providers and enterprises around the globe are challenged to deliver reliable connectivity in overcrowded RF environments. As spectrum increasingly becomes a scarce commodity, finding the right broadband connectivity solution is vital for all low and high density types of deployments. Combining the latest 802.11ac Wave 2 technology and the field proven, scalable performance of ePMP, the Force 300-13L delivers up to 400 Mbps of capacity. The Force 300-13L is a powerful, yet affordable subscriber module compatible with the ePMP3000 Access Point, while also interoperating with the ePMP2000 to enable seamless migration to 802.11ac Wave 2 technology.

Key Features:

  • Cambium Networks’ ePMP™ Force 300-13L is an affordable subscriber module well-suited for markets where price is key and networks where ranges are shorter
  • The ePMP 300-13L is designed to operate in high interference environments and provides throughput of up to 400 Mbps with bi-directional traffic of real user data.
  • Configurable Modes of operation ensure high performance and low round-trip latency in both symmetrical and asymmetrical traffic.
  • QoS management offers outstanding quality for triple play services – VoIP, video and data and provides three levels of traffic priority.
  • The ePMP Force 300-13L is available in 5 GHz only, supports a peak throughput of 400Mbps and does not support a dedicated spectrum analyzer.
  • Installation is a breeze for pole and wall mounting.
  • The ePMP Force 300-13L is compatible with ePMP 1000, ePMP 2000 and ePMP 3000 Access Points.
  • The ePMP Force 300-13L is available in EMEA, CALA and APAC regions where type approved. NOT available in FCC regions.

Technical Specifications:

  • Spectrum:
    • Channel Spacing: Configurable on 5 MHz increments
    • Range: 4920- 5970 MHz
    • Channel Width: 10 | 20 | 40 | 80 | MHz
  • Interface:
    • MAC (Media Access Control): Layer Cambium Proprietary
    • Physical Layer: 2x2 MIMO/OFDM
    • Ethernet Interface: 10/100/1000 BaseT
    • Protocols Used: IPv4, IPv6, UDP, TCP, IP, ICMP, SNMPv2c, HTTPS, STP, SSH, 24V POE, IGMP Snooping
    • Network Management: HTTPS, SNMPv2c, SSH
    • Spectrum Analyzer: Radio Tx must be off and used in conjunction with offline app from Cambium support site.
    • VLAN: 802.1Q with 802.1p priority
  • Performance:
    • ARQ: Yes
    • Nominal Receive Sensitivity (w/FEC) @20 MHz Channel: MCS9 -62dBm, MCS7 -67 dBm, MCS0 -89 dBm
    • Nominal Receive Sensitivity (w/FEC) @40 MHz Channel: MCS9 -61dBm, MCS7 -66 dBm, MCS0 -87 dBm
    • Nominal Receive Sensitivity (w/FEC) @80 MHz Channel: MCS9 -59dBm, MCS7 -64 dBm, MCS0 -85 dBm
    • Modulation Levels(Adaptive): MCS0 (BPSK) to MCS9 (256 QAM 5/6)
    • Quality of Service: Three level priority (Voice, High, Low) with packet classification by DSCP, COS, VLAN ID, IP & MAC Address, Broadcast, Multicast and Station Priority
    • Transmit Power Range: +3 to 27 dBm (combined, to regional EIRP limit) (1 dB interval)
    • Antenna Gain: 13 dBi
  • Physical:
    • Surge Suppression: 1 Joule Integrated
    • Environmental: IP55
    • Temperature: -30°C to +55°C (-22°F to +122°F)
    • Weight: 0.35 kg (0.88 lbs)
    • Wind Survival: 200 km/hour (124 mi/hour)
    • Dimensions (H x W x D): 235 x 77 x 58 mm
    • Pole Diameter: Range 3.8 cm – 6.4 cm (1.5 in – 2.5 in)
    • Power Consumption: 12 W Maximum, 9 W Typical
    • Input Voltage: 30 V Passive PoE (14-30V DC input)
  • Security Certifications:
    • Encryption: 128-bit AES (CCMP mode)
    • CE: DoC pending
  • Antenna Specifications:
    • Frequency Range: 4920 to 5950 MHz
    • Antenna Type: Flat panel
    • Peak Gain: 13 dBi
    • 3dB Beamwidth-Azimuth: 45 degrees
    • 3dB Beamwidth-Elevation: 15 degrees

More Information

MFRPartNum:
C050910C131A