PRODUCT SPECIFICATIONS
TM602A - Arris Touchstone Telephony TM602A
The ARRIS TM602A is an advanced E-MTA (Embedded Multimedia Terminal Adapter) that complies with DOCSIS® 2.0 and EuroDOCSIS 2.0 standards. This model supports two lines of carrier-grade Voice over IP (VoIP), High-Speed Data access, and IPv6, making it a robust solution for modern telecommunication needs. Note that the TM602A is not available for retail purchase; availability should be confirmed with service providers.
Features
- Compatibility: Backwards compatible with DOCSIS 1.0, 1.1, and 2.0.
- Compliance: DOCSIS® 2.0 and PacketCable™ 1.1/1.5 compliant design.
- Connectivity: High-speed internet via 10/100 Base-T Ethernet (RJ-45) or USB 1.1 port.
- VoIP Support: Supports up to two lines of carrier-grade VoIP.
- Protocol Support: Multiple protocol support including PacketCable (NCS) and Session Initiation Protocol (SIP).
- Diagnostics: Loop diagnostics for remote testing and troubleshooting of in-house wiring.
Performance
- Enhanced Line Card: Improved performance over the TM502, with over 20% increase in high loop current mode and 10% greater ringing voltage.
- Future Proofing: 1GHz tuner for compatibility with future plant upgrades.
- Codec Support: Supports toll grade, compression, and high fidelity codecs (high fidelity support available with future firmware upgrades).
Leadership in Battery Technology
- Battery Options: Includes 2-cell Li-Ion for up to 8-hour standby and 8-cell battery pack for up to 24-hour standby.
- Configurable Battery Management: Firmware allows customization of operation parameters.
- Boot from Battery: Can boot the modem from a charged battery without needing AC power.
Technical Description
- Interfaces:
- RF Interface: External F-connector
- Data Interfaces: 10/100 Base-T Ethernet (RJ-45), USB 1.1 Series B
- Telephony Interface: 2 lines; RJ-14 (“Line 1/2”), RJ-11 (“Line 2”)
- Input Voltage: 100-240 VAC 50/60 Hz
- Telephony:
- Supervisory Voltage: 48 VDC nominal
- Maximum Loop Length: 1000 ft (457M) of 26 AWG (0.4 mm) wire
- Ringing Load Capacity: 10 REN total; 5 per line
- High Loop Current Mode: 40mA constant current source (NA templates only)
- Telcordia™ GR 1089 Tested: Lightning and power surge compliant
- Programmable Interface: Supports multiple country templates
- RF Downstream:
- Frequency Range: 88-1002 MHz
- Modulation: 64 or 256 QAM
- Data Rate: Up to 30 or 42 Mbps
- RF Input Sensitivity Level: -15 to 15 dBmV
- Bandwidth: 6 MHz
- RF Upstream:
- Frequency Range: 5-42 MHz
- Modulation: QPSK, 8-QAM, 16-QAM, 32-QAM, 64-QAM & 128-QAM (S-CDMA only)
- Data Rate: Up to 30.72 Mbps
- RF Output Level:
- A-TDMA: +8 to 54 dBmV (32-QAM, 64-QAM), +8 to 55 dBmV (8-QAM, 16-QAM), +8 to 58 dBmV (QPSK)
- S-CDMA: +8 to +53 dBmV (all modulations)
- Automatic Level Adjust: Yes
- Gain Control Range: 50 dB
- Frequency Stability: ±5 kHz
- Output Impedance: 75 Ohms