PRODUCT SPECIFICATIONS
NETGEAR CM400-100NAS DOCSIS 3.0 8×4 Cable Modem
The NETGEAR CM400-100NAS connects an approved cable internet service to a computer or separate Ethernet router. Its DOCSIS 3.0 technology bonds eight downstream and four upstream channels, while a Gigabit Ethernet port provides the wired connection to your network.
Designed for customers who prefer to own their cable modem, the CM400 can replace eligible rental equipment when accepted by the internet provider. Confirm approval for your service address and subscribed plan before purchasing.
Key Features
- DOCSIS 3.0 cable modem with 8×4 channel bonding.
- One auto-sensing Gigabit Ethernet port.
- One coaxial cable internet connection.
- IPv6 support.
- Backward compatibility with DOCSIS 2.0 networks.
- Separate-router design for flexible home network setup.
Cable Internet Performance
NETGEAR advertises a maximum cable download rate of up to 340 Mbps. This is a theoretical DOCSIS rate, not a guaranteed internet speed or an assurance that a provider will approve a 340 Mbps service plan.
Connectivity
Connect the Ethernet port directly to one computer or to the WAN port of a separate router. A separate Wi-Fi router or router-and-access-point system is required for wireless networking; Wi-Fi is not built into the CM400.
Service Requirements
This modem requires compatible DOCSIS cable internet and provider activation. It does not replace a DSL modem, fiber ONT or cable telephone modem.
Ideal Applications
- Provider-approved home cable internet installations.
- Networks using a separate Ethernet router.
- Replacing rental equipment where the provider permits customer-owned modems.
Compatible Products
The CM400 connects to a router through standard Ethernet. The router must support an Ethernet WAN connection and the addressing method required by the cable provider. Activate the modem first, then configure the router.
- TP-Link ER605 Omada Gigabit VPN Router – suitable as a downstream Ethernet router. Connect the CM400 to its Gigabit WAN port and configure the appropriate WAN connection settings.
Important: This is an Ethernet interoperability recommendation, not a manufacturer-certified modem/router bundle. The ER605 is a wired router; wireless access requires separate equipment. Power each device with its own approved supply.
Important: Router compatibility does not establish cable-provider approval. Confirm that the CM400 is accepted for your location and service tier. Cable-bundled telephone service is not supported.
Technical Specifications
General
- Brand: NETGEAR
- Model: CM400
- SKU / MPN: CM400-100NAS
- Product Type: Cable modem
- Installation Environment: Indoor
Cable Technology
- Standard: DOCSIS 3.0
- Backward Compatibility: DOCSIS 2.0
- Channel Bonding: 8 downstream × 4 upstream
- Advertised Maximum Download Rate: Up to 340 Mbps; actual service speed depends on provider provisioning and network conditions
- Certification: CableLabs certified for U.S. cable internet services
Interfaces
- Ethernet: 1 × RJ45, auto-sensing 10/100/1000 Mbps
- Internet Connection: 1 × coaxial cable connector
- Built-in Wi-Fi: No
- Cable Voice Service: Not supported
Memory and Networking
- Flash Memory: 8 MB
- RAM: 64 MB
- IPv6: Supported
Power
- Power Source: External adapter
- Adapter Output: 12V DC, 1A
- Documented Adapter AC Input: 110–120V, 47–60 Hz; verify the supplied adapter label before use
Physical and Environmental
- Weight: 0.44 lb / 0.19 kg
- Operating Temperature: 0°C to 40°C / 32°F to 104°F
- Operating Humidity: Maximum 90% relative humidity, non-condensing
Included Parts
- CM400 cable modem
- Stand
- Ethernet cable
- Power adapter
- Quick installation guide
Download NETGEAR CM400 DOCSIS 3.0 Cable Modem Datasheet (PDF)