PRODUCT SPECIFICATIONS
Intellinet 334129 Cat6 U/UTP Ethernet Patch Cable, 3 m, Gray
The Intellinet 334129 is a preterminated Cat6 Ethernet patch cable for connecting network equipment to switches, routers, patch panels and compatible wall outlets. Its 3 m length, marketed as 10 ft., provides reach for desk connections and equipment patching.
RJ45 male connectors at both ends allow direct connection to standard RJ45 Ethernet sockets. Snag-free boots protect the connector latches, while molded strain relief helps reduce stress where the cable enters each plug.
Key Features
- Cat6 U/UTP unshielded construction.
- 3 m length, marketed as 10 ft.
- Two RJ45 male connectors with gold-plated contacts.
- 24 AWG stranded conductors.
- Snag-free boots and molded strain relief.
- Gray PVC jacket.
Network Performance
Intellinet advertises this model for frequencies up to 250 MHz and Ethernet link rates up to 10 Gbps. Achievable link speed depends on the connected equipment and the complete cabling channel. The cable does not increase the speed supported by a switch, network adapter or other component.
Connectivity and Cable Handling
The ready-to-use male-to-male assembly supports convenient equipment patching without field termination. Its flexible jacket and protected connector latches make it useful where cables are regularly connected, disconnected or rearranged.
Compatible Products
The Intellinet 334129 connects to standard RJ45 Ethernet sockets. Equipment at both ends must support a common Ethernet standard, and the complete cabling channel must meet the requirements of the intended link speed.
- Intellinet 519526 Cat6 16-Port UTP Patch Panel, 1U – compatible with the panel's front RJ45 ports for Ethernet data patching. The panel documentation lists applications through Gigabit Ethernet.
Important: This cable is unshielded and does not provide shield continuity. Plug it into the patch panel's front RJ45 socket; it is not intended for insertion into rear punch-down terminals. Confirm the supplied cable's conductor construction and application requirements before selecting it for PoE service.
Technical Specifications
General
- Brand: Intellinet Network Solutions
- Model / MPN: 334129
- Alphanumeric Model: IEC-C6-GY-10
- Product Type: Preterminated Ethernet patch cable
- Category: Cat6
- Color: Gray
Connectors
- End A: RJ45 male, 8P8C
- End B: RJ45 male, 8P8C
- Contacts: Gold-plated, 6 micro-inch per manufacturer specification
- Protection: Snag-free boots and molded strain relief
- Rated Mating Cycles: At least 750
Cable Construction
- Length: 3 m, marketed as 10 ft.
- Shielding: U/UTP, unshielded
- Wire Gauge: 24 AWG
- Conductor Type: Stranded
- Conductor Material: Not reliably confirmed for supplied inventory; manufacturer documentation conflicts between CCA and 100% copper
- Jacket: PVC, CM designation per manufacturer
- Jacket Outside Diameter: 5.5 mm
- Cable Shape: Round
- Net Weight: 110 g
Manufacturer-Advertised Performance
- Maximum Frequency: 250 MHz
- Maximum Ethernet Link Rate: Up to 10 Gbps, subject to equipment and channel requirements
Environmental
- Operating Temperature: 0 to 45°C (32 to 113°F)
- Storage Temperature: -10 to 70°C (14 to 158°F)
- Operating Humidity: 10–90% RH, noncondensing
Compliance
- Manufacturer-Listed Compliance: RoHS and REACH
Included Parts
- One Cat6 U/UTP Ethernet patch cable
Download Intellinet 334129 Cat6 3 m Ethernet Patch Cable Datasheet (PDF)
