PRODUCT SPECIFICATIONS
Intellinet 342070 Cat6 Ethernet Patch Cable, 3 m (10 ft.), Black
The Intellinet 342070 is a preterminated network patch cable for connecting Ethernet equipment to switches, routers, patch panels and wall outlets. Its 3 m (10 ft.) length provides practical reach for workstation connections and equipment patching.
The black PVC jacket, stranded construction and molded strain relief make it suitable for everyday cable routing. Snagless boots help protect the RJ45 connector latches when cables are pulled through crowded spaces or disconnected during maintenance.
Key Features
- Cat6 U/UTP construction with four unshielded twisted pairs.
- RJ45 male connectors at both ends.
- 24 AWG stranded conductors.
- Gold-plated contacts.
- Snagless boots and molded strain relief.
- Black PVC jacket and 3 m (10 ft.) nominal length.
Ethernet Performance
Intellinet advertises operation up to 250 MHz and Ethernet link rates up to 10 Gbps. Actual link speed depends on the connected equipment and the complete cable channel. This cable does not upgrade a slower network port or guarantee application throughput.
Connectivity
Use this patch cord with compatible RJ45 Ethernet interfaces. It can also be used in Cat5e and Cat5 environments, with performance determined by the complete connection.
Installation Considerations
This is an unshielded patch cable. It does not provide shield continuity and should not be specified as a shielded, outdoor or direct-burial cable.
Ideal Applications
- Desktop and workstation Ethernet connections.
- Data connections between compatible network devices.
- Front-port patching in network racks.
- Connections to compatible Ethernet wall outlets.
Compatible Products
The Intellinet 342070 connects to RJ45 female Ethernet interfaces. The product below is confirmed for front-port data patching based on its Cat6 UTP interface. This does not establish a tested 10 Gbps channel or PoE compatibility.
- Intellinet 519526 Cat6 16-Port UTP Patch Panel, 1U – Accepts the cable's RJ45 male plug at a front port for Ethernet patching. The panel's rear connections require separate punch-down wiring.
Technical Specifications
General
- Brand: Intellinet Network Solutions
- Model / MPN: 342070
- Alternate Part Number: IEC-C6-BK-10
- Product Type: Ethernet network patch cable
- Manufacturer Category Designation: Cat6
- Color: Black
Cable Construction
- Length: 3 m (10 ft.)
- Shielding: U/UTP, unshielded
- Pairs: Four
- Conductor Gauge: 24 AWG
- Conductor Type: Stranded
- Jacket: PVC, manufacturer-designated CM
- Cable Shape: Round
- Jacket Outside Diameter: 5.5 mm (0.217 in.)
Connectors
- Connector A: RJ45 male, 8P8C
- Connector B: RJ45 male, 8P8C
- Contacts: 6 micro-inch gold plating
- Protection: Snagless boots and molded strain relief
- Manufacturer-Stated Mating Cycles: At least 750
Performance
- Manufacturer-Advertised Maximum Link Rate: Up to 10 Gbps, subject to channel and equipment requirements
- Manufacturer-Advertised Maximum Frequency: 250 MHz
Power / PoE
- Manufacturer Claim: PoE support up to IEEE 802.3bt
Environmental and Physical
- Operating Temperature: 0 to 45°C (32 to 113°F)
- Storage Temperature: -10 to 70°C (14 to 158°F)
- Operating Humidity: 10–90% RH, noncondensing
- Net Weight: 110 g (3.88 oz.)
Included Parts
- One Intellinet 342070 network patch cable
Download Intellinet 342070 Cat6 3 m Black Ethernet Patch Cable Datasheet (PDF)
