PRODUCT SPECIFICATIONS
Intellinet 522533 Gigabit PCI Express Network Card
The Intellinet 522533 adds a wired Ethernet connection to a compatible desktop computer through a PCI Express x1 interface. Its single RJ45 port supports 10/100/1000 Mbps connections for office networking, shared storage access and everyday Internet use.
Use this internal network adapter to add an Ethernet interface or replace an unavailable onboard connection. The included 8 cm low-profile bracket provides an installation option for compatible compact computer cases.
Key Features
- One RJ45 port with 10/100/1000 Mbps auto-negotiation.
- PCIe x1 interface for compatible x1, x4, x8 and x16 slots.
- Wake-on-LAN support.
- Jumbo frame support up to 9 kB.
- IEEE 802.3x flow control.
- IEEE 802.1Q VLAN tagging and IEEE 802.1p traffic prioritization.
- Automatic crossover detection and correction.
Gigabit Ethernet Performance
A Gigabit full-duplex connection supports simultaneous transmission and reception at up to 1 Gbps in each direction. The advertised 2 Gbps figure combines both directions; the Ethernet port operates at a maximum link speed of 1000 Mbps.
Installation and Driver Support
Installation requires a compatible PCI Express slot, suitable chassis clearance and a supported driver. Intellinet currently lists Windows Vista, 7, 8, 8.1, 10, 11 and Linux. Select drivers for the card's actual hardware revision and operating system.
Ideal Applications
- Adding wired networking to a compatible desktop.
- Replacing an unavailable onboard Ethernet interface.
- Connecting workstations to a Gigabit LAN.
- Upgrading compatible low-profile computers with Ethernet connectivity.
Compatible Products
The Intellinet 522533 requires a compatible PCI Express x1, x4, x8 or x16 slot. Check motherboard support, chassis clearance, bracket fit and driver availability before purchase.
For network connectivity, connect its RJ45 port to a standards-compliant copper Ethernet switch or router. Gigabit operation requires a 1000BASE-T-capable port and suitable four-pair cabling, such as properly installed Cat5e or Cat6.
- 560696 5-Port Gigabit Ethernet Switch – Provides 10/100/1000 Mbps RJ45 ports compatible with the card's standard Ethernet interface.
Important: Conventional PCI, Mini PCIe and M.2 slots are different interfaces. A low-profile bracket does not guarantee clearance inside every small computer. Wake-on-LAN requires compatible motherboard, firmware, driver and power-management settings. Jumbo frames require matching support and configuration along the relevant network path.
Technical Specifications
General
- Brand: Intellinet Network Solutions
- Model / MPN: 522533
- Additional Part Reference: INC-1G-PCIE
- Product Type: Internal Gigabit Ethernet network card
Host Interface
- Interface: PCI Express x1
- Supported Slot Sizes: Compatible PCIe x1, x4, x8 and x16 slots
- Low-Profile Installation: 8 cm bracket included
Ethernet
- Ports: 1 x RJ45
- Link Speeds: 10/100/1000 Mbps
- Standards: IEEE 802.3, 802.3u and 802.3ab
- Auto-Negotiation: Supported
- Crossover Detection and Correction: Supported
- Flow Control: IEEE 802.3x
- Jumbo Frames: Up to 9 kB
- VLAN Tagging: IEEE 802.1Q
- Traffic Prioritization: IEEE 802.1p
- Wake-on-LAN: Supported, subject to host configuration
- Indicators: Link and activity LEDs
Operating Systems
- Manufacturer-Listed Support: Windows Vista, 7, 8, 8.1, 10, 11 and Linux
- Driver Requirement: Match the operating system and hardware revision
Power
- Power Source: Host computer through PCI Express
Physical Specifications
- Dimensions: 121 x 68 x 19 mm, per current manufacturer documentation
Environmental
- Operating Temperature: 0 to 40 °C
- Storage Temperature: 0 to 65 °C
- Operating Humidity: 10 to 90%, non-condensing
- Storage Humidity: 5 to 95%, non-condensing
Certifications
- Manufacturer-Listed Compliance: FCC and CE
Included Parts
- Gigabit PCI Express network card
- 8 cm low-profile bracket
Download Intellinet 522533 Gigabit PCI Express Network Card Datasheet (PDF)
