website@flyteccomputers.com

L-com

Part:
CA4N002

L-com CA4N002 2 ft N-Male to N-Female 50-Ohm 400-Series Low-Loss Coaxial Cable

$12.60
$29.00
Condition:
New

PRODUCT SPECIFICATIONS

L-com CA4N002 2 ft N-Male to N-Female Coaxial Cable

The L-com CA4N002 is a 2 ft 400-Series low-loss coaxial cable assembly with one N-male connector and one N-female connector. It provides a short extension for antenna feeds and other properly matched RF connections.

Designed for 50-ohm RF systems, this cable is useful when an installation needs additional reach between an existing coaxial cable and an equipment interface. Its male-to-female configuration preserves the connection arrangement while adding a short cable section.

Key Features

  • Exact manufacturer model: CA4N002.
  • 2 ft nominal cable length.
  • N-male to N-female connector configuration.
  • 400-Series low-loss coaxial construction.
  • 50-ohm nominal impedance.
  • Tested cable assembly.

RF Connectivity

The N-male end mates with a corresponding N-female connection, while the N-female end accepts a corresponding N-male connection. Verify connector polarity, impedance, operating frequency, RF power, and allowable insertion loss before selecting connected equipment.

Installation Planning

Use the 2 ft length where a short extension meets the installation requirements. Support the cable to avoid loading equipment connectors, observe the specified minimum bend radius, and include cable and connector losses in the complete RF link budget.

Ideal Applications

  • Short antenna-feed extensions.
  • Wireless LAN infrastructure connections.
  • RF cable routing between nearby connection points.
  • RF voice, video, and data systems with verified electrical requirements.

Compatible Products

The CA4N002 is intended for 50-ohm RF installations requiring an N-male to N-female cable extension. Compatibility must be verified for the complete signal path.

  • The cable's N-male end requires a corresponding N-female interface.
  • The cable's N-female end requires a corresponding N-male interface.
  • Connected equipment, adapters, and cables must meet the installation's impedance, frequency, power, and insertion-loss requirements.

Important: Matching N-type connectors alone does not establish compatibility. Verify standard versus reverse-polarity interfaces and do not assume suitability for 75-ohm systems. This cable does not directly connect to SMA, RP-SMA, BNC, or RJ45 interfaces.

For outdoor installations, confirm the required environmental protection and connector-sealing method. No assembly-specific waterproof or IP rating is claimed here.

Technical Specifications

General

  • Brand: L-com
  • Model / MPN: CA4N002
  • Product Type: RF coaxial cable assembly
  • Cable Series: 400-Series
  • Nominal Impedance: 50 ohms

Connectors

  • Connector A: Type N male
  • Connector B: Type N female

Cable Construction

  • Center Conductor: Copper-clad aluminum
  • Jacket Material: Polyethylene

Physical Specifications

  • Nominal Length: 2 ft (0.6096 m)
  • Nominal Cable Diameter: 0.405 in. (10.3 mm)
  • Minimum Bend Radius: 1.0 in. (25.4 mm), as listed in L-com's catalog

Environmental

  • Operating Temperature: -40°C to +80°C

More Information

MFRPartNum:
CA4N002