PRODUCT SPECIFICATIONS
L-com CA4N100 100 ft N-Male to N-Female Coaxial Cable
The L-com CA4N100 is a 100 ft 400-Series low-loss coaxial cable assembly with one N-male connector and one N-female connector. It provides an RF extension for antenna feeds and wireless infrastructure installations.
Designed for 50-ohm RF systems, this assembled cable supports installations that require additional separation between equipment and an antenna or an existing coaxial connection. Its suitability depends on the operating frequency, RF power, connector configuration, and allowable signal loss of the complete system.
Key Features
- Exact manufacturer model: CA4N100.
- 100 ft cable length.
- N-male to N-female connector configuration.
- 400-Series low-loss coaxial construction.
- 50-ohm nominal impedance.
RF Connections
The N-male end mates with a corresponding standard N-female RF connection, while the N-female end accepts a corresponding standard N-male connection. Confirm impedance, connector polarity, frequency, and power requirements before installation.
Installation Planning
Include the full cable run and all connectors, adapters, and protective components in the RF link budget. Low-loss cable still introduces attenuation, and a 100 ft run can materially reduce the signal available at the receiving end.
Ideal Applications
- Antenna feed extensions in properly matched RF systems.
- Wireless LAN infrastructure cable runs.
- RF voice, video, and data installations with verified interface requirements.
Compatible Products
The CA4N100 is intended for 50-ohm RF installations requiring a standard N-male to N-female cable extension. Equipment compatibility must be checked against the complete RF path.
- The cable's N-male end requires a corresponding standard N-female connection.
- The cable's N-female end requires a corresponding standard N-male connection.
- Confirm operating frequency, RF power, impedance, connector polarity, and acceptable total insertion loss before selecting equipment.
Important: Do not assume compatibility with reverse-polarity N connectors, 75-ohm systems, SMA, RP-SMA, or other connector types. A matching connector does not establish that the cable meets the installation's frequency, power, or signal-loss requirements. This is an RF coaxial assembly, not an Ethernet or PoE cable.
Technical Specifications
General
- Brand: L-com
- Model / MPN: CA4N100
- Product Type: RF coaxial cable assembly
- Cable Series: 400-Series
RF Interfaces
- Connector 1: Type N male
- Connector 2: Type N female
- Nominal Impedance: 50 ohms
Cable Construction
- Center Conductor: Copper-clad aluminum
- Jacket Material: Polyethylene
Physical Specifications
- Nominal Length: 100 ft (30.5 m, manufacturer-rounded)
- Nominal Cable Diameter: 0.405 in. (10.3 mm)
- Minimum Bend Radius: 1.0 in. (25.4 mm), as listed in L-com's catalog
Environmental
- Operating Temperature: -40°C to +80°C