PRODUCT SPECIFICATIONS
L-com HG5419P 19 dBi Directional Flat Panel Antenna
The L-com HG5419P is a directional RF antenna for wireless systems operating from 5.47 to 5.85 GHz. It provides 19 dBi gain for installations that need focused coverage toward a remote site or service area.
Use it with compatible external-antenna radios for fixed wireless access, directional WLAN connections, or wireless video links. The antenna supports indoor and outdoor installation.
Key Features
- 19 dBi antenna gain.
- 5.47–5.85 GHz operating range.
- Integral N-female RF connector.
- Vertical or horizontal polarization, selected by orientation.
- UV-stable white fiberglass radome.
- Included tilt-and-swivel mast mount.
Directional Coverage
The published horizontal and vertical beamwidths are 16°. Aim the antenna toward the intended coverage area and match polarization at both ends of the link.
RF Connectivity
The antenna presents a 50-ohm interface. Connect it using a suitable N-male termination, with any feed cable selected for the operating frequency, RF power, and acceptable signal loss.
Outdoor Installation
The weather-resistant radome protects the antenna elements. The adjustable mount helps installers align the antenna after mast installation. Follow the manufacturer's grounding and surge-protection instructions.
Ideal Applications
- Directional fixed wireless access.
- Point-to-point links using compatible radios.
- Wireless video transmission within the supported band.
Compatible Products
Select a radio with a compatible RF interface and an operating channel contained within 5.47–5.85 GHz. Account for the entire channel bandwidth, feed-cable loss, antenna polarization, and permitted transmit power.
- Ubiquiti BulletAC-IP67-US airMAX Bullet AC Radio – A technically suitable single-port radio option when configured for supported 5 GHz channels within the HG5419P's frequency range. Its N-type antenna interface matches this antenna's connection format.
Important: The HG5419P does not support the Bullet's 2.4 GHz operation or 5 GHz channels outside the antenna's specified range. Configure antenna gain as 19 dBi and account for feed losses when setting permitted radiated power. This single-port antenna does not provide two independent polarization feeds for a dual-port MIMO radio.
Technical Specifications
General
- Brand: L-com
- Model / MPN: HG5419P
- Product Type: Directional flat patch / panel antenna
RF Specifications
- Frequency Range: 5470–5850 MHz (5.47–5.85 GHz)
- Gain: 19 dBi
- Horizontal Beamwidth: 16°
- Vertical Beamwidth: 16°
- Polarization: Vertical or horizontal, selected by orientation
- Front-to-Back Ratio: Greater than 25 dB
- Impedance: 50 ohms
- Maximum RF Input Power: 50 W
- VSWR: Less than 1.5:1 average
- RF Connection: One integral N-female connector
- Published Lightning-Protection Feature: DC short
Construction and Mounting
- Radome: UV-stable white fiberglass
- Datasheet Weight: 0.72 kg (1.6 lb)
- Mount: Tilt-and-swivel mast mount
- Published Mast Range: Approximately 32–75 mm outside diameter
Environmental
- Operating Temperature: -40 to +85°C
- Rated Wind Velocity: 210 km/h (130 mph)
- Installation Environment: Indoor or outdoor
Included Parts
- HG5419P antenna.
- Tilt-and-swivel mast-mount kit.
Download L-com HG5419P 19 dBi Panel Antenna Datasheet (PDF)
