PRODUCT SPECIFICATIONS
L-com HG5833D 5.8 GHz 32.5 dBi Outdoor Parabolic Dish Antenna
The L-com HG5833D HyperGain is a directional parabolic dish antenna for 5.8 GHz ISM and UNII wireless applications. It is designed for wireless bridges, point-to-point connections and backhaul installations that require a focused antenna pattern.
With 32.5 dBi gain and a narrow 5° beamwidth, the HG5833D directs coverage toward a specific remote location. It connects to a separate radio through an N-female RF connector and can be installed for either horizontal or vertical polarization.
Key Features
- 32.5 dBi gain for directional wireless links.
- 5° horizontal and vertical beamwidth.
- Selectable horizontal or vertical polarization through mounting orientation.
- Aluminum reflector with a light gray, UV-resistant polymer finish.
- Perforated dish construction helps reduce wind loading.
- Included tilt-and-swivel mast mount for antenna alignment.
- Optional radome cover available separately.
Directional Performance
The focused radiation pattern suits fixed links between known locations. Accurate alignment and matching polarization at both ends are important when planning the installation. Link distance and throughput depend on the connected radios, path conditions and complete system design.
RF Connectivity
This is a passive external antenna that requires a separate wireless radio and an appropriate RF connection. Select the radio, coaxial cable and any adapters for the antenna's specified operating band and RF interface. An antenna connector alone does not establish radio compatibility.
Outdoor Construction and Mounting
The weather-resistant reflector is intended for outdoor installations. The supplied mount provides tilt and swivel adjustment, with up-or-down adjustment from 0° to 30° to assist alignment.
Ideal Applications
- Directional 5.8 GHz wireless bridges.
- Point-to-point links between buildings or remote sites.
- Wireless backhaul connections.
- Directional endpoints in appropriately engineered point-to-multipoint systems.
Compatible Products
Radio integration requires operation within 5.725–5.850 GHz, a suitable 50-ohm external RF interface, and an appropriate cable assembly with a standard-polarity N-male connector at the antenna end. Confirm the radio manufacturer's approved antenna configuration, polarization, transmit-power limits and installation requirements before purchase.
- L-com HGFH-533D Parabolic Dish Replacement Feedhorn – Supplied as the feedhorn only; mounting hardware is sold separately.
Important: The HG5833D supports one linear polarization at a time. It is not a dual-polarized, two-port MIMO antenna. Do not assume compatibility with radios requiring two antenna feeds, proprietary dish connections or operation outside the specified frequency range.
Technical Specifications
General
- Brand: L-com
- Product Family: HyperGain / HyperLink Wireless
- Model / MPN: HG5833D
- Product Type: Passive directional parabolic dish antenna
Antenna and RF Specifications
- Frequency Range: 5725–5850 MHz (5.725–5.850 GHz)
- Gain: 32.5 dBi
- Polarization: Horizontal or vertical, depending on mounting orientation
- Horizontal Beamwidth: 5°
- Vertical Beamwidth: 5°
- Front-to-Back Ratio: 38 dB
- Impedance: 50 ohms
- VSWR: < 1.5:1 average
- Maximum RF Input Power: 100 W
- RF Connector: N-female, standard polarity
- Lightning Protection Specification: DC short
Physical Specifications and Mounting
- Nominal Dish Diameter: 900 mm (35.4 in.)
- Weight: 9 kg (20 lb)
- Reflector Material: Aluminum
- Finish: Light gray UV-resistant polymer coating
- Mount: Tilt-and-swivel mast mount
- Maximum Mast Diameter: 50.8 mm (2 in.)
- Up/Down Adjustment: 0° to 30°
Environmental
- Operating Temperature: -40°C to +85°C (-40°F to +185°F)
- Intended Installation: Outdoor, all-weather operation
Included Parts
- Included: HG5833D antenna and tilt-and-swivel mast mount kit
Download L-com HG5833D 5.8 GHz Parabolic Dish Antenna Datasheet (PDF)
