website@flyteccomputers.com

Lanbowan

Part:
ANT4958D36P-DP

Iuron ANT4958D36P-DP 4.95–5.85 GHz 36 dBi Dual-Polarized MIMO Dish Antenna with Dual N-Female Connectors

$284.52
$349.99
Condition:
New

PRODUCT SPECIFICATIONS

Iuron ANT4958D36P-DP 36 dBi Dual-Polarized MIMO Dish Antenna

The Iuron ANT4958D36P-DP is a directional dish antenna for wireless links operating within 4.95–5.85 GHz. Its vertical and horizontal polarization paths support suitable radios equipped with two external RF chains.

This antenna can be incorporated into engineered point-to-point bridges and wireless backhaul installations. A complete deployment requires a compatible radio, suitable RF cables and an appropriate mounting arrangement.

Key Features

  • 36 dBi gain for each polarization path.
  • Vertical and horizontal polarization.
  • Two N-female RF connectors.
  • 50-ohm nominal impedance.
  • Directional dish design for focused wireless links.

Directional Link Performance

The focused antenna pattern supports links aimed toward a specific remote site. Performance depends on alignment, line of sight, interference, cable loss and the capabilities of the connected radios.

RF Connectivity

Use frequency-rated 50-ohm RF cables with N-male connectors at the antenna end. Radio-end connectors must match the selected equipment. Connect both polarization paths when using a two-chain MIMO configuration.

Installation Considerations

Check mounting hardware, structural support and environmental suitability before installation. Account for antenna gain and cable loss when configuring the radio's transmit power.

Ideal Applications

  • Engineered point-to-point wireless bridges.
  • Directional backhaul between network sites.
  • WISP links using suitable external-antenna radios.

Compatible Products

Select a radio with external 50-ohm RF interfaces and an operating channel within 4.95–5.85 GHz. Dual-polarization MIMO operation requires two suitable RF chains.

The antenna's two N-female connectors require RF cables with N-male antenna connections. Verify the radio-end connector type, cable frequency rating, RF power handling and cable loss..

Important: Connector fit alone does not establish compatibility. Check frequency, impedance, polarization, RF power, mounting requirements and the radio's approved external-antenna configuration. Integrated-antenna radios and proprietary antenna interfaces may require a different solution.

Technical Specifications

General

  • Brand: Iuron
  • Manufacturer: Iuron
  • Model / MPN: ANT4958D36P-DP
  • Product Type: Dual-polarized MIMO dish antenna

RF Specifications

  • Frequency Range: 4950–5850 MHz (4.95–5.85 GHz)
  • Frequency Bandwidth: 900 MHz
  • Gain: 36 dBi per polarization path
  • Polarization: Vertical and horizontal
  • Horizontal Beamwidth: 3°
  • Vertical Beamwidth: 3°
  • Front-to-Back Ratio: Greater than 40 dB
  • Isolation: Greater than 30 dB
  • VSWR: Typical ≤1.5:1; maximum 2.0:1
  • Nominal Impedance: 50 ohms
  • Published Maximum RF Power: 100W

Connections

  • RF Connectors: 2 x N-female

Physical Specifications

  • Dish Diameter: 1.2 m
  • Published Weight: 25 kg

More Information

MFRPartNum:
ANT4958D36P-DP