PRODUCT SPECIFICATIONS
MikroTik RB750UPr2 hEX PoE lite 5-Port Ethernet Router with Passive PoE-Out
The MikroTik RB750UPr2 hEX PoE lite is a compact and affordable 5-port Ethernet router designed for small office, home office, WISP, surveillance, and low-power network deployments. It combines MikroTik RouterOS flexibility with passive PoE output, allowing the router to power compatible devices directly from its Ethernet ports.
The RB750UPr2 features five 10/100 Mbps Ethernet ports, a USB 2.0 Type-A port, 64 MB RAM, and a 650 MHz QCA9531 CPU. Running RouterOS Level 4, it supports advanced routing, firewall, bandwidth control, NAT, VLANs, VPN, monitoring, and network management features in a small desktop form factor. MikroTik lists the RB750UPr2 with passive PoE input and passive PoE output on Ether2 through Ether5.
The hEX PoE lite is especially useful when you need to reduce power adapters and simplify cabling. Ports Ether2–Ether5 can provide passive PoE output to compatible devices using the same voltage supplied to the router, making it ideal for powering wireless CPEs, small access points, cameras, or other low-power network devices.
Key Features
- 5 x 10/100 Mbps Fast Ethernet ports
- Passive PoE-out support on Ether2–Ether5
- Passive PoE-in support on Ether1
- DC jack and PoE-in power input options
- 650 MHz QCA9531 single-core CPU
- 64 MB RAM and 16 MB flash storage
- USB 2.0 Type-A port with USB power reset
- RouterOS Level 4 license included
- Passive cooling for silent operation
- Compact desktop design for SOHO and small network installations
- Voltage, current, and PCB temperature monitoring
Passive PoE for Simple Deployments
The RB750UPr2 can power compatible passive PoE devices through ports Ether2 to Ether5, helping reduce clutter from separate power adapters and PoE injectors. This makes it a practical solution for small networks with wireless radios, IP cameras, access points, or remote Ethernet-powered devices.
RouterOS Network Control
With RouterOS Level 4, the hEX PoE lite provides advanced MikroTik networking capabilities usually found in much larger systems. Administrators can configure firewall rules, NAT, queues, bandwidth limits, VLANs, VPN services, monitoring, routing, and automation through MikroTik’s familiar RouterOS interface.
Compact and Efficient Design
The RB750UPr2 is built for low-power operation and quiet indoor deployment. Its compact enclosure, passive cooling, and flexible power input options make it suitable for small offices, network cabinets, retail counters, WISP customer sites, and home lab environments.
Ideal Applications
- Small office and home office routing
- WISP customer-premises installations
- Passive PoE powering for compatible access points or CPE devices
- Basic surveillance networks with low-power IP cameras
- RouterOS training and lab environments
- Compact wired network deployments
- Branch office or remote site connectivity
- Specifications
- Product code: RB750UPr2
- Architecture: MIPSBE
- CPU: QCA9531
- CPU core count: 1
- CPU nominal frequency: 650 MHz
- Switch chip model: QCA9531
- Dimensions: 113x89x28mm
- RouterOS license: 4
- Operating System: RouterOS
- Size of RAM: 64 MB
- Storage size: 16 MB
- Storage type: FLASH
- MTBF: Approximately 100'000 hours at 25C
- Tested ambient temperature: -40°C to 70°C
- Powering
- Number of DC inputs: 2 (PoE-IN, DC jack)
- DC jack input Voltage: 8-30 V
- Max power consumption: 51 W
- Max power consumption without attachments: 3 W
- Cooling type: Passive
- PoE in: Passive PoE
- PoE in input Voltage: 8-30 V
- PoE-out
- PoE-out ports: Ether2-Ether5
- PoE out: Passive PoE
- Max out per port output (input 18-30 V): 1 A
- Max total out (A): 2 A
- Ethernet
- 10/100 Ethernet ports: 5
- Peripherals
- Number of USB ports: 1
- USB Power Reset: Yes
- USB slot type: USB type A
- Max USB current (A): 1
- Other
- Current Monitor: Yes
- PCB temperature monitor: Yes
- Voltage Monitor: Yes
