PRODUCT SPECIFICATIONS
NetPoint NP64 4 ft Dual-Polarized Parabolic Antenna
The NetPoint NP64 is an outdoor directional parabolic antenna for connectorized wireless radios operating within 5.9–7.2 GHz. Its 4 ft reflector provides up to 36 dBi gain for point-to-point backhaul, directional customer-premises installations and public safety communications.
Dual polarization, two N-female RF connections and an included radome make the NP64 suitable for outdoor links that require precise antenna alignment. N-to-RP-SMA jumpers are included for connection to suitable radios.
Key Features
- 5.9–7.2 GHz operating frequency range.
- Up to 36 dBi gain, varying with frequency.
- 4 ft directional parabolic reflector.
- Dual-slant polarization configurations of 45° or 90°.
- Two N-female RF connectors with included N-to-RP-SMA jumpers.
- Integrated radome for outdoor deployment.
- Adjustable mounting for antenna alignment.
Directional RF Performance
The NP64 concentrates RF energy into a narrow beam to support focused wireless links and reduce reception from unwanted directions. Gain is specified as 32 dBi at 5.9 GHz, 34 dBi at 6.8 GHz and 36 dBi at 7.2 GHz.
Connectivity and Radio Selection
The antenna uses a 50-ohm RF interface. Select a connectorized radio whose operating channels fall within the antenna's frequency range, and verify the radio connector type and polarization configuration before installation.
The NP64 is a passive antenna. A separate radio supplies the wireless protocol, network interfaces, management functions and power requirements.
Outdoor Installation
The mounting system supports azimuth adjustment of ±60° and elevation adjustment of ±15°. Supported mounting pipe diameters range from 25.4 to 75 mm. Precise alignment and a suitable supporting structure are essential for this narrow-beam antenna.
Ideal Applications
- WISP point-to-point backhaul.
- Directional customer-premises wireless links.
- Building-to-building connectivity.
- Public safety communications backhaul.
Compatible Products
The NP64 requires a connectorized radio operating within 5.9–7.2 GHz, with suitable RF connections and a matching polarization configuration.
- Cambium Networks ePMP Force 4600C: Listed by NetPoint as a compatible pairing. Its two RP-SMA antenna connections and 5.925–7.125 GHz operating range support connection through the appropriate N-to-RP-SMA jumpers.
Important: Verify the supplied jumper connector polarity, radio mounting arrangement and permitted antenna configuration before installation. Configure antenna gain and transmit power according to the radio manufacturer's instructions and applicable EIRP limits.
Frequency limitation: The NP64 is specified from 5.9 GHz upward. It should not be selected for lower-frequency 5 GHz channels outside that range. Compatibility with one radio does not establish compatibility with every product from the same brand.
Technical Specifications
General
- Brand: NetPoint
- Model: NP64
- Manufacturer Part Number Listed by Flytec: NP6-DP-4FT
- Product Type: Outdoor directional parabolic antenna
RF Specifications
- Frequency Range: 5.9–7.2 GHz
- Gain: 32 dBi at 5.9 GHz; 34 dBi at 6.8 GHz; 36 dBi at 7.2 GHz
- Polarization: Dual slant, 45° or 90° configuration
- Impedance: 50 ohms
- VSWR, HPOL: Less than 2.0
- Beamwidth, VPOL: 2.4°
- Beamwidth, HPOL: 2.0°
- Front-to-Back Ratio: Greater than 60 dB
RF Connections
- Antenna Connectors: Two N-female
- Included Jumpers: N-to-RP-SMA
- Nominal Jumper Length: Approximately 600 mm / 2 ft
Mechanical and Environmental
- Reflector Size: Nominal 4 ft class
- Radome: Included
- Azimuth Adjustment: ±60°
- Elevation Adjustment: ±15°
- Mounting Pipe Diameter: 25.4–75 mm
- Operating Temperature: -45 to +60°C
Included Components
- NP64 parabolic antenna with radome.
- N-to-RP-SMA RF jumpers.
Download NetPoint NP64 Datasheet — Current NP6-SDP-4FT Version (PDF)
