PRODUCT SPECIFICATIONS
Iuron N-M/N-M LMR400 2M N-Male to N-Male Coaxial Cable
The Iuron N-M/N-M LMR400 2M is a pre-terminated RF coaxial cable assembly with an N-male connector at each end. Flytec identifies the cable as LMR400 and specifies a length of 2 meters, approximately 6.56 feet.
This assembly provides a coaxial connection between equipment requiring N-male cable terminations. It can serve as an RF jumper where the installation's connector, impedance, frequency and power requirements have been verified against the supplied cable.
Key Features
- Exact listed model: N-M/N-M LMR400 2M.
- N-male connector at both ends.
- 2 m cable length, approximately 6.56 ft.
- Listed by Flytec as an LMR400 coaxial cable assembly.
- Pre-terminated construction for installations requiring this connector arrangement.
RF Connectivity
The male-to-male configuration is intended for matching N-female interfaces. Confirm connector polarity and impedance before connecting equipment; an N-type connector designation alone does not establish complete RF compatibility.
Installation Requirements
Verify the assembly's frequency range, insertion loss and RF power rating for the intended application. Outdoor, waterproof and direct-burial ratings have not been confirmed for this exact model.
Ideal Applications
- RF jumper installations requiring N-male connectors at both ends.
- Antenna feed connections after electrical and environmental requirements are verified.
- Replacement of an existing assembly with matching specifications and a 2 m length requirement.
Compatible Products
No specific radio, antenna or surge protector has been reliably confirmed as compatible with this exact cable assembly.
Before selecting connected equipment, verify all the following:
- Matching N-female interfaces with the correct connector polarity.
- Matching cable and equipment impedance.
- An assembly frequency rating covering the operating band.
- Adequate RF power handling and acceptable insertion loss.
- Suitable environmental ratings for the installation.
Important: Do not select this cable solely because the connector threads appear to fit. Standard N-type and reverse-polarity N-type interfaces must not be treated as interchangeable. This assembly does not directly replace cables terminated with SMA, RP-SMA, TNC or other connector families.
Technical Specifications
General
- Listed Product Brand: Iuron
- Model: N-M/N-M LMR400 2M
- Product Type: RF coaxial cable assembly / jumper
- Cable Designation: LMR400
Connectors
- End A: N-male
- End B: N-male
- Connector Quantity: 2
Physical Specifications
- Length: 2 m, approximately 6.56 ft
