PRODUCT SPECIFICATIONS
Tenda TEG1016D 16-Port Unmanaged Gigabit Ethernet Switch
The Tenda TEG1016D expands a wired network with sixteen 10/100/1000 Mbps RJ45 ports. Its unmanaged, plug-and-play design provides straightforward connectivity for offices, workgroups and surveillance networks without requiring switch configuration.
A 32 Gbps switching capacity and store-and-forward architecture support traffic between connected devices. Desktop and rackmount installation options make it suitable for workspaces and equipment cabinets.
Key Features
- 16 auto-negotiating 10/100/1000 Mbps RJ45 ports.
- Auto MDI/MDIX for simplified Ethernet connections.
- 32 Gbps aggregate switching capacity.
- Store-and-forward switching with automatic MAC address learning.
- 8K MAC address table.
- Built-in 100–240 VAC power supply.
- Power and individual port Link/Activity indicators.
Gigabit Connectivity
Connect compatible computers, routers, printers and other Ethernet equipment. Each port negotiates the supported connection speed. Use Cat5e or better cabling for Gigabit Ethernet.
Switching Performance
The switch supports simultaneous transmission and reception on full-duplex Gigabit links. Its 32 Gbps rating describes aggregate switching capacity; individual ports operate at up to 1 Gbps in each direction.
Power and Installation
The internal power supply accepts 100–240 VAC at 50/60 Hz. This model provides Ethernet data connectivity without PoE output. Cameras, access points and other powered devices require their own suitable power source.
Ideal Applications
- Expanding wired connectivity in small offices and workgroups.
- Connecting desktop computers, printers and network storage.
- Carrying surveillance traffic from separately powered IP cameras.
- Adding Gigabit connections in desktop or rack installations.
Compatible Products
The TEG1016D connects to equipment supporting standard 10BASE-T, 100BASE-TX or 1000BASE-T Ethernet over RJ45 cabling.
- Computers and network storage with compatible copper Ethernet interfaces.
- Routers and switches with standard RJ45 Ethernet ports.
- Ethernet printers and other wired network peripherals.
- IP cameras and wireless access points with compatible Ethernet interfaces and a separate suitable power source.
Important: The TEG1016D does not supply PoE power. PoE-dependent devices require an appropriate injector or another manufacturer-approved power source. Fiber connections require separate conversion equipment; this model has no documented SFP slots.
Technical Specifications
General
- Brand: Tenda
- Model / MPN: TEG1016D
- Product Type: Unmanaged Gigabit Ethernet switch
- Installation: Desktop or rackmount
Ethernet
- Ports: 16 x RJ45
- Port Speeds: 10/100/1000 Mbps, auto-negotiating
- Cable Detection: Auto MDI/MDIX
- Standards: IEEE 802.3, 802.3u, 802.3ab and 802.3x
- Gigabit Cabling: Cat5e UTP or better
- PoE Output: None
Switching
- Switching Capacity: 32 Gbps
- Forwarding Method: Store-and-forward
- MAC Address Table: 8K entries
- MAC Learning: Automatic learning and updating
- Published Per-Port Forwarding Rates: 14,880 pps at 10 Mbps; 148,800 pps at 100 Mbps; 1,488,000 pps at 1000 Mbps
Power
- Power Supply: Built-in AC supply
- Input: 100–240 VAC, 50/60 Hz
- Published Maximum Consumption: 12W at 220V
Indicators
- Power: 1 LED
- Link/Activity: 1 LED per Ethernet port
Physical and Environmental
- Published Dimensions: 294 x 179 x 44 mm
- Operating Temperature: 0°C to +40°C
- Storage Temperature: -40°C to +70°C
- Operating Humidity: 10–90%, non-condensing
- Storage Humidity: 5–90%, non-condensing
Manufacturer-Listed Compliance
- CE
- FCC
- RoHS
Documented Package Contents
- TEG1016D switch
- Power cord
- User guide
Download Tenda TEG1016D Legacy Configuration Datasheet (PDF)
