PRODUCT SPECIFICATIONS
The Fiber Box THEFIBERBOXUBIONU FTTH ONU Termination Enclosure
The Fiber Box THEFIBERBOXUBIONU is a fiber termination enclosure intended to organize an ONU installation and its associated cabling at an FTTH subscriber location. Its built-in splice tray provides a dedicated area for fiber management.
The enclosure combines an ASA plastic housing with a hinged lid and side slide closures. The lid can be raised and held open during service, giving technicians access to the internal installation.
Key Features
- FTTH termination enclosure designed around a UFiber ONU installation.
- Built-in splice tray for fiber organization.
- ASA plastic construction intended to resist weathering and UV exposure.
- Hinged service lid with an open-position holding feature.
- Side slide closures.
- Integrated 3/4-inch coupler connection.
- Manufacturer-described suitability for indoor or outdoor use.
Fiber and Cable Management
The internal layout supports organization of the ONU and connecting cables. During installation, maintain the fiber manufacturer's bend-radius requirements and ensure that cable routing does not interfere with the lid or equipment connections.
Installation and Service Access
The lid opens upward and slides into a holding position while work is performed. Confirm equipment fit, cable-entry requirements and mounting arrangements before installation.
Environmental Considerations
ASA construction is specified for resistance to varying climates and UV damage. A certified IP or NEMA rating was not confirmed. Select the installation location according to the enclosure's verified protection level and the operating requirements of the equipment installed inside.
Ideal Applications
- FTTH subscriber termination installations.
- ONU and fiber-splice organization.
- Serviceable fiber entry points at customer premises.
- Standardized enclosure layouts for verified UFiber ONU configurations.
Compatible Products
The manufacturer identifies the enclosure as designed for a UFiber ONU installation. However, the reviewed documentation does not identify an exact supported ONU model or hardware revision.
No individual ONU model is listed here as confirmed compatible. Before ordering, verify:
- The exact ONU model and hardware revision.
- Internal mounting fit and available service clearance.
- Fiber connector clearance and minimum bend radius.
- Ethernet and power-cable routing.
- Equipment heat dissipation and environmental requirements.
- The fitting required for the 3/4-inch coupler connection.
Important: Do not assume compatibility with every Ubiquiti UFiber product or with other manufacturers' ONUs. Physical enclosure fit does not establish GPON, EPON, XPON, OLT or power compatibility.
An ONU, power supply, optical adapters and patch cables are not confirmed as included. Do not treat this listing as a complete powered ONU kit.
Technical Specifications
General
- Brand / Manufacturer: The Fiber Box
- Listed Model / MPN: THEFIBERBOXUBIONU
- Product Type: Fiber termination and ONU enclosure
- Application: FTTH subscriber installation
Construction and Access
- Housing Material: ASA plastic
- Lid: Hinged, with an open-position holding feature
- Closure: Side slide closures
- Fiber Management: Built-in splice tray
- Cable Management: Internal supports for connecting cables
- Coupler Connection: Nominal 3/4 inch
Installation Environment
- Intended Location: Indoor or outdoor, per published description
- UV Resistance: Manufacturer-described ASA resistance to UV damage
