PRODUCT SPECIFICATIONS
Tycon RPPL2424-20L-30 RemotePro Solar PoE System
The Tycon RPPL2424-20L-30 is a RemotePro outdoor solar power system for off-grid and backup power applications. It includes a 30W solar panel, 20Ah LiFePO4 lithium battery capacity, 24V system voltage, and 24V 30W passive PoE output. The system is housed in a UV protected polycarbonate enclosure that can be mounted to a wall or pole.
The battery system uses Wide Temp LFP (LiFePO4) lithium batteries with 4000+ cycle life at 80% discharge and an embedded BMS for extended battery life. The PWM controller provides LVD load control, and the enclosure is hinged, gasket sealed, and designed with multiple cable entry ports for CAT5/6, antenna cables, connectors, or other cabling.
Key Features
- Remote solar system for off-grid operation
- 24V system voltage with 24V 30W passive PoE output
- 30W solar panel and 20Ah LiFePO4 lithium battery capacity
- 240Wh battery system capacity
- 4000+ cycle life at 80% discharge
- Advanced battery charge controller with embedded BMS
- Weatherproof, UV resistant outdoor polycarbonate enclosure
- Wall or pole mountable enclosure and solar panel bracket system
Applications
- Wireless base stations and clients
- Wireless bridge and repeater deployments
- Remote lighting
- Surveillance cameras
- Remote sensors
- Backup power systems
Technical Specifications
- Capacity
- Continuous Power Generation: 6.5W
- Reserve Time: 27hrs
- Battery Capacity: 20Ah
- Battery System Capacity: 240Wh
- Ports / Interfaces
- Passive PoE Out (30W): 24V
- Secondary Volts Out (DC): 24V 1.5A
- Cable Entry Ports: CAT5/6 cable, antenna cables/connectors, or other cabling
- Hardware
- Enclosure Type: UV Protected Polycarbonate
- Battery Type: Wide Temp LFP (LiFePO4) Lithium without heater
- Controller Type: PWM Dual Input: Solar/POE, Dual Output: Battery Voltage/POE with DCDC Converter
- Battery Life: 10 Years
- Power
- System Voltage: 24V
- Battery Voltage (DC): 24V
- PoE Output Voltage: 24V
- Solar Panel Size: 30W
- Solar Charge Controller Type: PWM
- Overcharge Protection: 28.6V
- Over-discharge Protection: 22.0V
- Over-discharge Recovery Volts: 24.5V
- Controller Self Consumption: < 0.5W
- Physical
- Enclosure External Size: 12 x 8.5 x 7' (305 x 216 x 178mm)
- Enclosure Internal Size: 11 x 7 x 6' (279 x 178 x 152mm)
- Solar Panel Dimensions: 21 x 20' (540 x 510mm)
- Mounting: Wall or pole mountable
- System Weight (no batteries): 17lb (8kg)
- Battery Weight: 4.4lb (2kg)
- Environmental
- Operating Temperature: -30°C to +60°C (-22°F to 140°F)
- Wind Speed Rating: 110MPH (49m/s)
- Certifications
- Warranty: 3 Years
- Solar Panel Power Output Guarantee: 25 years
More Information
MFRPartNum:
RPPL2424-20L-30
