Tycon Power Systems


Tycon 9-36VDC IN, 24V 20W Gigabit Passive PoE OUT. DC to DC Converter and PoE Injector



The TP-DCDC-1224G is a low cost and high efficiency solution for those requiring Passive Power over Ethernet from a 12VDC voltage source like a battery system or vehicle. They have an integrated POE injector to apply the power and data output to the CAT5/6 Ethernet cable. The output voltage is regulated and protected.

They have a common (-) and two (+) for connecting 2 power sources, such as a primary with a backup power source.

They accept gigabit data-in to a shielded RJ45 Jack and provide gigabit data-out and PoE power on the shielded RJ45 output jack. It works by supplying power on Ethernet pins 4,5(V+) and 7,8(V-). This converter has various protections for surge, short circuit and overload. The units have power outputs up to 20W.


  • Input Voltage 9-36VDC; Output 24VDC (Passive)
  • Integrated Gigabit PoE Inserter
  • High Power 20W
  • Short Circuit, Over Current and Over Voltage Protection
  • High Temperature Operation
  • Removable Wire Terminal Input for up to 12AWG wires
  • I.T.E. Power Supply, UL Listed


  • 12V / 24V / 48V Battery Systems, Vehicle Applications
  • Wireless Access Points and Client Devices
  • IP Phone and Security Camera Systems
  • PoE Lighting Applications


  • 85 x 76 x 36mm (3.4 x 3 x 1.4in)


  • 134g (4.7oz)

Technical Description

  • DC Input Voltage: 9VDC – 36VDC
  • DC Input Current: 2.86A @ 9V 0.67A @ 36V
  • DC Input Connector: Removeable Screw Type Compression Wire Terminal (12 AWG Max)
  • DC Output Voltage: 24V (Passive)
  • Data in & Data/POE Output Connector: RJ45 (Shielded)
  • Output Current (max): 0.8A
  • Output Power (max): 20W
  • Self Consumption Power: 1W
  • Efficiency (min): 75%
  • Line Regulation: 1%
  • Load Regulation: 5%
  • Ripple: 1%
  • Noise: 1%
  • EMC Standards: FCC Class B EN55022 Class B
  • Safety Standards: CSA 22.2 &TUV EN60950
  • Operating Temp: -30 to +60°C (-22 to +140°F)
  • Operating Humidity: 5% - 90%
  • Storage Temp: -40 to +80°C (-40 to +176°F)
  • MTBF (Mean Time Between Failure): 166,000 Hours

More Information