PRODUCT SPECIFICATIONS
4+ km, multi-gigabit, 60 GHz bridge with SFP+ support.
The airFiber 60 XG (AF60 XG) is a 60 GHz point-to-point (PtP) bridge with a built-in, 5 GHz backup radio. The AF60 XG delivers low-interference, low-latency throughput, making it an ideal component for carrier backhaul. It also features integrated GPS and a Bluetooth management radio to simplify setup and configuration.
Features:
- Low-interference, 60 GHz spectrum
- High-gain dish antenna
- 5 GHz backup radio
- 4+ km link range
- Supports channel bonding to achieve up to a 6 Gbps throughput rate
- Terragraph-certified
- 10G SFP+ port
- Integrated GPS
- Link planning support via ISP Design Center
- Simple, Bluetooth-powered setup with the UISP® Mobile app
Managed with the UISP application: Version 1.4.3 and later
Managed with the UISP Mobile app: Version 2.19 and later (iOS/ Android)
Note: Price shown is for a single unit. This product should be purchased in pairs in order to form links.
Technical Description:
Hardware
- Processor: Quad-Core ARM® Cortex® A72 at 1.6 GHz
- Memory: 2 GB DDR4
- Networking interface:
- (1) GbE RJ45 port
- (1) 1/10G SFP+ port
- RF connections: Internal
- Power method: Passive PoE 4-pairs (1, 2+; 3, 6-) (4, 5+; 7, 8-) or 2-pairs (4, 5+; 7, 8-)
- Power supply: 48V DC, 0.65A Gigabit PoE adapter (included)
- Supported voltage range: 48V DC ± 10%
- Max. power consumption: 31.2W
- GPS: Yes
System
- Maximum throughput:
- 5 GHz: 866.6 Mbps
- 60 GHz: 3.8 Gbps/6 Gbps (with channel bonding enabled)
- Maximum range: 4 km
- Encryption: WPA2-PSK (AES)
RF
- Operating frequency: 57 to 66 GHz (Depends on regulatory region.)
- Channel bandwidth: 2160 MHz/4320 MHz (with channel bonding enabled)
- Operating channels: 58320, 59400, 60480, 61560, 62640, 63720, 64800 MHz(It depends on the channel bandwidth)
Back-Up RF
- Operating frequency (Depends on regulatory region.)
- US/CA
- U-NII-1 5150 - 5250 MHz
- U-NII-3 5725 - 5850 MHz
- US/CA
- Channel bandwidth: 20/40/80 MHz