Ubiquiti UA-G3-B G3 Access Reader NFC & Mobile Unlock IP55 PoE-Powered

Ubiquiti UA-G3-B G3 Reader

Compact third-generation access reader with Touch Pass support.

Key Features

• Unlock with an NFC card, UniFi Identity mobile app, or Touch Pass*
• Supports hand-wave unlocking as a request-to-exit device
• Provides entry and exit greeting messages
• IP55-rated weather resistance (-30 to 45°C)
• Connects to UniFi Access Hub via PoE

Technical Specification

• Overview:
  • Dimensions: 93 x 40 x 36.5 mm  (3.7 x 1.6 x 1.4')
  • NFC Card & Keyfob Access: ✓
  • Apple/Google Wallet: ✓
  • Mobile Unlock: ✓
  • Handwave Request to Exit: ✓
  • NDAA Compliant: ✓
  • UL 294 Level:
    • Destructive attack: Level I
    • Line security: Level I
    • Endurance: Level I
    • Standby power: Level I
  • Weatherproofing: IP55
• Mechanical:
  • Weight: 82 g (2.9 oz)
  • Enclosure Material: Polycarbonate, glass
  • Mount Material: Aluminum alloy
  • Mounting
    • In-wall, gang box (Included)
    • Junction box (Optional)
• Hardware:
  • Indoor and Outdoor Use: Yes
  • Ambient Operating Temperature: -30 to 45° C (-22 to 113° F)
  • Ambient Operating Humidity: 5 to 90% noncondensing
  • Networking Interface: (1) 10/100 MbE RJ45 port
  • Connectivity:
    • BLE 4.1
    • NFC
  • Power Method:
    • PoE
    • UL 294 Power-limited Class 2 PSU
    • UL 60950-1/62368-1 LPS/PS2 PSU
  • Max. Power Consumption: 5W
  • Supported Voltage Range: 48V DC
  • ESD/EMP Protection: Air: ±15kV, contact: ±8kV
  • Sensors: Proximity sensor
  • Speaker: ✓
  • LEDs: R/G/B/W
  • Button: (1) Factory-reset
  • NFC Frequency: 13.56 MHz
  • NFC Read Range: < 30 mm (1.18'')
  • NFC Technology:
    • ISO/IEC 14443A / 14443B / 15693 / 18092 (Ecma 340)
    • MIFARE Classic / MIFARE DESFIRE
    • Sony FeliCa™ (ID only)
    • NFC Forum tags T1T, T2T, T3T, T4T and T5T
    • ECP 2.0
  • PoE Cabling Requirements:
    • Cat 5e cabling is the minimum performance category recommended. The performance category utilized should match the transmission speed required at the installation site.
    • The minimal conductor gauge permitted to connect between the PSE or power injector and the PD shall be 26 AWG (0.13 mm² ) for patch cords; 24 AWG (0.21 mm² ) for horizontal or riser cable.
  • UL 294 Statement:
    • Compliance with IEEE 802.3 specifications was not verified as part of UL 294.
    • The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits.
  • CAN/ULC-60839-11-1 Grade: Grade assignment: I
  • Certifications: CE, FCC, IC, UL 294, CAN/ULC-60839-11-1
  • Document number, and issue date and/or revision level: UA-G3, V01
• Software:
  • Management Application: Access
  • Software Information: The software version can be checked at https://unifi.ui.com