PRODUCT SPECIFICATIONS
Ubiquiti UACC-PSU-12V-150W 150W Hot-Swappable Power Module
The Ubiquiti UACC-PSU-12V-150W is a replacement AC-to-DC power supply module for the Enterprise Fortress Gateway (EFG) and Gateway Enterprise (UXG-Enterprise). It delivers 150W of output power at 12V DC and 12.5A.
Designed for the supported gateways' hot-swappable power supply bays, this module is useful for replacing a failed PSU or keeping a spare available for maintenance. Its 100–240V AC, 50/60 Hz input supports installations using either 120V or 230V mains power.
Key Features
- Exact replacement model: UACC-PSU-12V-150W.
- 150W total output capacity with 12V DC, 12.5A output.
- Hot-swappable design for supported Ubiquiti gateways.
- 100–240V AC input at 50/60 Hz.
- Overvoltage and overcurrent protection.
- SGCC steel enclosure.
Power and Replacement Use
This module supplies power through the compatible gateway's dedicated PSU interface. The 150W rating describes the module's output capacity; actual power consumption depends on the connected equipment and operating conditions.
When replacing a module in an operating redundant-power configuration, follow Ubiquiti's installation procedure and ensure the remaining power supply is connected and functioning.
Compatibility
Ubiquiti identifies the EFG and UXG-Enterprise as supported devices. Match the exact replacement PSU model before ordering; voltage or wattage alone does not establish compatibility with other equipment.
Ideal Applications
- Replacing a failed EFG or UXG-Enterprise power supply module.
- Maintaining spare PSUs for supported UniFi gateway installations.
- Servicing supported gateways with redundant hot-swappable power supplies.
Compatible Products
The UACC-PSU-12V-150W is designed for the dedicated hot-swappable power supply bays in the following Ubiquiti gateways:
Important: This module uses a proprietary PSU interface. It is not a universal 12V adapter or a PoE injector. Do not assume compatibility with other UniFi devices, third-party CRPS equipment, or other power modules based only on appearance, voltage, or wattage.
Replacement guidance: Follow the installation instructions for the exact gateway and PSU. Continued operation during replacement requires a functioning, powered redundant PSU.
Technical Specifications
General
- Brand: Ubiquiti
- Model / MPN: UACC-PSU-12V-150W
- Product Type: Hot-swappable AC-to-DC power supply module
- Supported Devices: EFG and UXG-Enterprise
- PSU Interface: Proprietary
Electrical
- Input Voltage Range: 100–240V AC
- Input Frequency: 50/60 Hz
- Maximum Input Current: 7A at 120V AC; 3.6A at 230V AC
- Output Voltage: 12V DC
- Rated Output Current: 12.5A
- Total Output Power: 150W
- Inrush Current: Less than 50A peak
- Full-Load Efficiency: Greater than 81%
Protection
- Overvoltage Protection: 13.5V
- Overcurrent Protection: 18.5–22.5A
Physical Specifications
- Dimensions: 185 x 73.5 x 40 mm (7.3 x 2.9 x 1.6 inches)
- Weight: 733 g (1.6 lb)
- Enclosure Material: SGCC steel
Environmental
- Ambient Operating Temperature: -5 to 50°C (23 to 122°F)
- Ambient Operating Humidity: 5–95%, noncondensing
Certifications
- Listed Certifications: CE, FCC, IC, UKCA, KC, CCC, RoHS