null

Ubiquiti

Part:
UISP-FIBER-XG

Ubiquiti UFiber UISP Fiber XG

$122.99
$129.00
Condition:
New

PRODUCT SPECIFICATIONS

UISP Fiber XGS-PON CPE

An optical network unit that can deliver 10 Gbps uplink/downlink speeds over distances up to 20 km.

Features:

  • (1) XG-PON optic SC/APC port
  • (1) 2.5GbE RJ45 LAN port that supports 24V passive PoE
  • Bridge and Router Mode support
  • Managed with the UISP application: Version 1.5.7 and later

Note: This device is only compatible with the UISP Fiber XGS OLT. It cannot be used with third-party OLTs.

Technical Description

  • Mechanical
    • Dimensions: 100 x 100 x 27 mm (3.9 x 3.9 x 1.1")
    • Weight: 220 g (0.49 lb)
    • Enclosure material: UV-stabilized polycarbonate
  • Hardware
    • Networking interface    
      • (1) SC/APC, ITU-G.987 XGPON WAN port
      • (1) 100/1,000/2,500 MbE RJ45 LAN ports
    • Management interface    
      • Ethernet in-band
      • PON
    • PoE interface: (1) PoE in, 24V DC passive PoE
    • Memory: 256 MB DDR
    • Onboard flash storage: 32 MB NOR
    • Max. power consumption: 6W
    • Power method:
      • USB-C 5V DC, 3A
      • 24V DC passive PoE
    • Power supply:
      • 5V DC, 3A power adapter
      • Passive PoE 2-pair (4, 5+; 7, 8-)
    • Supported voltage range:
      • 5V DC adapter
      • 10–30V DC passive PoE
    • Total non-blocking line rate:
      • Downstream: 9.95 Gbit/s
      • Upstream: 2.44 Gbit/s
    • Normal TX range of optical module: 2 to 7dBm
    • Normal RX range of optical module: -9 to -27dBm
    • Button: (1) Factory reset
    • Operating temperature: -15 to 45° C (5 to 113° F)
    • Operating humidity: 10 to 95% non-condensing
    • Certifications: CE, FCC, IC
  • Fiber
    • Operating wavelength:
      • TX: 1,270nm
      • RX: 1,577nm
    • Line code: Scrambled NRZ
    • Physical reach: 20 km
  • LEDs
    • Power: White: ON
    • Ethernet: Steady white: link up
    • Blinking white: activity
    • OFF: link down
    • PON status:
      • (3) signal LEDs
      • All-OFF: bootup
      • 1x orange: signal too low (< -27 dbm)
      • 1x white: signal low (>= -27 dbm)
      • 2x white: signal good (>= -24 dbm)
      • 3x white: signal strong (>= -12 dbm)
      • 1x orange + 2x white: signal too strong (>= -9 dbm)
      • 3x orange: no signal
      • LEDs alternate between orange + white + orange and a signal strength indicator: no authority

More Information

MFRPartNum:
UISP-FIBER-XG
Installation Guide:
Datasheet: