PRODUCT SPECIFICATIONS
Ubiquiti UniFi UVC-AI-MS-2-W AI Multi Sensor 2 Camera
The Ubiquiti UniFi UVC-AI-MS-2-W is a white, all-weather 16MP PoE+ surveillance camera equipped with two independently adjustable 8MP lenses. Its multi-sensor design allows one camera to monitor a broad area while also capturing a narrower, closer view of an important entrance, vehicle lane, checkout area, or other point of interest.
Each imaging channel records at up to 3840 × 2160 resolution and 30 FPS. The adjustable 3.18–7.42 mm lenses provide 2.33x optical zoom, allowing the camera to move between wide and telephoto fields of view without relying exclusively on digital enlargement.
A Multi-TOPS AI engine supports face recognition, license plate recognition, and smart detections for people, vehicles, and animals. Built-in adaptive infrared illumination provides night-vision coverage up to 20 m (65 ft), while IP66 weather protection and IK10 impact resistance support exposed indoor and outdoor installations.
Key Features
- Two independently adjustable 8MP camera lenses
- 16MP combined multi-sensor resolution
- Up to 3840 × 2160 resolution per imaging channel
- Maximum frame rate of 30 FPS
- 2.33x optical zoom
- Wide horizontal field of view up to 108.8°
- Telephoto horizontal field of view of 42.8°
- Face and license plate recognition
- Smart detection of people, vehicles, and animals
- Adaptive infrared night vision up to 20 m (65 ft)
- Integrated microphone
- Gigabit Ethernet RJ45 interface
- PoE+ power with maximum 25W consumption
- MicroSD card expansion slot
- IP66 weatherproofing
- IK10 tamper and impact resistance
- White aluminum-alloy and polycarbonate enclosure
Dual-Lens 4K Video Coverage
The AI Multi Sensor 2 uses two independently adjustable 1/2.8-inch 8MP imaging systems. Each channel supports 3840 × 2160 video in a 16:9 aspect ratio at up to 30 FPS, providing a combined 16MP multi-sensor configuration.
The two lenses can be positioned separately, enabling a deployment to combine wide-area situational awareness with a more focused view of a specific subject or location.
Optical Zoom and Field of View
Each 3.18–7.42 mm lens provides 2.33x optical zoom with an aperture range of f/1.8 to f/2.8. At the wide setting, the field of view is 108.8° horizontal, 57.6° vertical, and 130.8° diagonal. At the telephoto setting, it is 42.8° horizontal, 24.1° vertical, and 49.1° diagonal.
AI-Powered Detection
The dual-core Arm Cortex-A76-based processor provides a Multi-TOPS AI engine for face recognition, license plate recognition, and smart detection of people, vehicles, and animals. Detection performance depends on camera positioning, subject distance, viewing angle, lighting, image clarity, and the configuration of the UniFi Protect system.
Night Vision and Image Control
Built-in adaptive IR LEDs and an IR-cut filter provide night-vision coverage up to 20 m (65 ft). Available image controls include color, brightness, sharpness, contrast, white balance, exposure control, HDR, 2D and 3D noise reduction, motion-based noise reduction, masking, and text overlay.
PoE+ Connectivity
A Gigabit Ethernet RJ45 port carries network data and PoE+ power over a single Ethernet connection. The camera accepts 42.5–57V DC through PoE+ and consumes up to 25W. The connected switch or injector must explicitly support IEEE 802.3at PoE+ and have sufficient remaining power budget.
Outdoor and Tamper-Resistant Design
The IP66-rated enclosure provides protection against dust and powerful water jets, while the IK10 rating provides a high level of resistance to external mechanical impact. The camera operates from -20 to 50°C (-4 to 122°F) in 0–90% noncondensing humidity.
Ceiling, wall, pole, and conduit-adapter mounting configurations are supported with the included mounting components. Optional dedicated arm, pendant, and weather-shield accessories provide additional installation options.
Ideal Applications
- Wide-area monitoring with a simultaneous close-up view
- Building entrances and exits
- Parking areas and vehicle access lanes
- Retail stores and checkout areas
- Warehouses and loading areas
- Commercial and campus surveillance
- Outdoor locations requiring IP66 and IK10 protection
- UniFi Protect deployments requiring advanced AI detections
Compatible Products
The UVC-AI-MS-2-W requires a Gigabit Ethernet network connection and IEEE 802.3at PoE+ power. The power source must provide the camera’s supported 42.5–57V DC range and accommodate its maximum 25W consumption within the source’s total PoE budget.
- Ubiquiti USW-16-POE UniFi 16-Port PoE+ Switch – ports 1–8 support IEEE 802.3at PoE+ with up to 32W per port, which is sufficient for one UVC-AI-MS-2-W. The switch has a shared 42W total PoE budget, so the consumption of every connected PoE device must be considered.
The following dedicated Ubiquiti mounting accessories are officially confirmed for the AI Multi Sensor 2. Flytec product pages for these exact accessories were not reliably located, so no internal links are included:
- UACC-AI-MS-2-AM-W: White AI Multi Sensor 2 camera arm mount
- UACC-AI-MS-2-PM-W: White pendant mount with G3/4-inch threaded outlet
- UACC-AI-MS-2-WS-W: White weather shield for outdoor wall or pole installations
Important: A passive 24V PoE source is not compatible. Use IEEE 802.3at PoE+ with sufficient per-port output and total PoE budget. Do not assume that mounts for the AI Multi Sensor 4, AI Dome, AI Turret, G5, or G6 cameras will fit this model.
Recording requirement: This camera is designed for a UniFi Protect surveillance deployment. Confirm that the selected UniFi console, NVR, storage configuration, and current Protect software support the camera count, two 4K video channels, desired retention period, and enabled AI features.
Technical Specifications
General
- Brand: Ubiquiti
- Product Family: UniFi Protect
- Product Name: AI Multi Sensor 2
- Model / MPN: UVC-AI-MS-2-W
- Product Type: Dual-lens AI network surveillance camera
- Color: White
Video
- Combined Camera Resolution: 16MP
- Imaging Channels: 2
- Resolution per Channel: 8MP, 3840 × 2160
- Aspect Ratio: 16:9
- Maximum Frame Rate: 30 FPS
- Image Settings: Color, brightness, sharpness, contrast, white balance, exposure control, HDR, 2DNR, 3DNR, motion-based noise reduction, masking, and text overlay
Optical Specifications
- Image Sensors: Two 1/2.8-inch 8MP sensors
- Lenses: 2 × 3.18–7.42 mm
- Aperture: f/1.8–f/2.8
- Optical Zoom: 2.33x
- Wide Field of View: 108.8° horizontal, 57.6° vertical, 130.8° diagonal
- Telephoto Field of View: 42.8° horizontal, 24.1° vertical, 49.1° diagonal
Night Vision
- IR Night-Vision Range: Up to 20 m (65 ft)
- Night Mode: Built-in adaptive IR LED illumination
- IR-Cut Filter: Included
AI and Detection Features
- AI Engine: Multi-TOPS AI engine
- Face Recognition: Supported
- License Plate Recognition: Supported
- Smart Detections: People, vehicles, and animals
- Processor: Dual-core Arm Cortex-A76-based chip
Audio
- Microphone: Integrated
- Speaker: Not specified
Network and Storage
- Network Interface: 1 × Gigabit Ethernet RJ45 port
- Local Storage Slot: MicroSD card
- Maximum Ethernet Cable Diameter: 6.5 mm (0.26 in)
Power
- Power Method: PoE+
- PoE Requirement: IEEE 802.3at-compatible power source
- Supported Voltage Range: 42.5–57V DC
- Maximum Power Consumption: 25W
Physical Specifications
- Dimensions: 218 × 132 × 93.5 mm (8.6 × 5.2 × 3.7 in)
- Weight: 1.3 kg (3 lb)
- Enclosure Material: Aluminum alloy and polycarbonate
- Mount Material: Polycarbonate and stainless steel
- Button: Factory reset
- LED: Status LED
Mounting
- Included Mounting Options: Ceiling, wall, pole mount, and conduit pipe adapter
- Optional Mounting Options: Dedicated weather shield, arm mount, and pendant mount
Environmental
- Weatherproofing: IP66
- Tamper Resistance: IK10
- Operating Temperature: -20 to 50°C (-4 to 122°F)
- Operating Humidity: 0–90% noncondensing
Certifications and Compliance
- Certifications: CE, FCC, IC
-
NDAA Compliant: Yes
View Ubiquiti UVC-AI-MS-2-W AI Multi Sensor 2 Official Technical Specifications
View Ubiquiti UVC-AI-MS-2-W AI Multi Sensor 2 Official Technical Specifications
