PRODUCT SPECIFICATIONS
Yeastar YST-S2 S2 2-Port FXS Analog Telephone Expansion Module
The Yeastar S2 is an internal telephony module that adds two FXS interfaces to a compatible Yeastar PBX. Listed by Flytec as YST-S2, it allows two suitable analog telephones to connect to the host phone system.
The module is useful when retaining analog desk phones or adding analog extensions to a supported Yeastar installation. Yeastar also documents connecting a fax machine through an S2-enabled FXS port, subject to the host PBX's fax configuration and service requirements.
Key Features
- Yeastar manufacturer model S2; Flytec SKU YST-S2.
- Provides two FXS analog telephone interfaces.
- Supports connection of two suitable analog telephones.
- Installs inside a supported Yeastar PBX.
- Uses a host module slot or an EX08 expansion board, depending on PBX model.
- Analog extensions are configured and managed through the host PBX.
Analog Extension Connectivity
FXS interfaces provide the telephone-side connection for suitable analog endpoints. The S2 enables the host PBX to serve these devices as analog extensions within the phone system.
Important: The S2 provides FXS interfaces, not FXO interfaces. It is intended for analog endpoints and must not be substituted for a module used to connect incoming PSTN telephone lines.
PBX Installation
Supported systems with onboard module slots accept the S2 in an available compatible slot. Other supported systems, including S100, S300, P560 and P570, require an EX08 expansion board for this type of telephony module.
Check the exact PBX model, hardware revision, available slots and existing module allocation before ordering. The S2 module, host PBX and any required expansion board are separate products.
Analog Fax Applications
Yeastar documents using an S2 or SO module to connect a fax machine to an FXS port on an S-Series PBX. Successful fax operation depends on the PBX configuration, fax device, trunk and remote endpoint.
Ideal Applications
- Adding two analog telephone connections to a supported Yeastar PBX.
- Retaining suitable analog phones during a PBX upgrade.
- Connecting a supported fax device through the host PBX.
- Expanding analog connectivity in an existing modular Yeastar installation.
Compatible Products
Compatibility requires a supported Yeastar hardware PBX, an available compatible module position and any required expansion board. The S2 is not a universal PCI, USB or standalone Ethernet telephone adapter.
- Yeastar S20 VoIP PBX – S2 installs in an available onboard module slot. The S20 supports up to two telephony modules in total.
- Yeastar S50 VoIP PBX – S2 installs in an available onboard module slot. The S50 supports up to four telephony modules in total.
- Yeastar S412 VoIP PBX – Install S2 modules only in the designated T_Slot1 and T_Slot2 positions. These provide expansion beyond the S412's eight fixed FXS ports.
- Yeastar P550 PBX Appliance – S2 is listed among supported modules for the P550's four onboard module slots.
- Yeastar P560 PBX Appliance – Requires an EX08 expansion board with an available module slot.
- Yeastar EX08 Expansion Board – Provides four module positions and eight RJ11 interfaces for supported telephony modules. Required for S2 installation in the documented S100, S300, P560 and P570 configurations.
Important: EX30 is an E1/T1/J1 expansion board and is not the mounting board for an S2 module. Use EX08 where an expansion board is required.
Important: S412 slot restrictions differ from the general four-slot description: only T_Slot1 and T_Slot2 accept S2 modules.
Important: PBX user limits, concurrent-call capacity and available module positions still apply. Adding S2 interfaces does not independently increase the PBX's licensed or processing capacity.
Technical Specifications
General
- Brand: Yeastar
- Manufacturer Model / MPN: S2
- Flytec SKU: YST-S2
- Product Type: Internal analog telephony expansion module
Analog Interfaces
- Interface Type: FXS, Foreign Exchange Station
- Interface Count: Two
- Primary Application: Connecting two suitable analog telephones
- Telephone Connection: Host-system RJ11 FXS interfaces associated with the installed module
- Fax Use: Documented for supported S-Series PBX configurations
Installation
- Mounting: Internal compatible Yeastar module position
- Expansion Board Requirement: EX08 for documented S100, S300, P560 and P570 installations
- S412 Restriction: S2 modules install in T_Slot1 or T_Slot2
- Standalone Operation: Requires a compatible host PBX
System Dependencies
- Configuration: Through the host PBX
- Power: Through the compatible host installation; no independent external power input documented
- Call Features and Capacity: Determined by the host PBX and configuration