PRODUCT SPECIFICATIONS
AirLive AC-1200R AC1200 Dual-Band Gigabit Wi-Fi Router
The AirLive AC-1200R is a wireless router and access point for home and small office networks. Concurrent 2.4 GHz and 5 GHz radios let you connect different wireless devices while Gigabit Ethernet supports wired network connections.
Use it to share an Internet connection, add wireless access to an existing network, or configure a wireless client or bridge connection. Independently configurable radios provide flexibility for different network layouts.
Key Features
- Concurrent dual-band 802.11ac wireless networking.
- Four Gigabit LAN ports and one Gigabit WAN port.
- Two detachable dual-band antennas.
- Five operating modes: Dual Band Router, Dual AP, WISP + AP, Bridge + AP, and Client + AP.
- Guest mode and bandwidth control.
- Browser-based configuration and AirLive Central Wireless management support.
Wireless Performance
Wireless link rates reach up to 300 Mbps on 2.4 GHz and 866 Mbps on 5 GHz. AC1200 describes the combined wireless speed class across both bands; actual throughput depends on client capabilities, interference, distance and configuration.
Connectivity
Connect computers, network storage and other Ethernet equipment through the LAN ports. The dedicated WAN port connects to an upstream modem or Ethernet Internet service.
Network Management
A web interface provides setup, configuration backup and firmware upgrade functions. AirLive Central Wireless supports discovery and administration of supported AirLive equipment.
Ideal Applications
- Home Internet sharing and wireless networking.
- Small office wired and wireless connectivity.
- Adding dual-band access to an existing Ethernet network.
- WISP client and wireless bridge installations with suitable upstream equipment.
Compatible Products
The AC-1200R connects to standard Ethernet equipment through its 10/100/1000 Mbps LAN ports. Wireless clients must support a matching Wi-Fi band, standard and security configuration.
- MikroTik RBcAPGi-5acD2nD-US cAP ac Dual-Band Access Point – Can extend the wired LAN with an additional access point. Connect an AC-1200R LAN port to the data input of the cAP ac's suitable Gigabit PoE injector, then connect the injector's powered output to the cAP ac PoE-input port. Configure the cAP ac as an access point/bridge.
Important: Power the cAP ac through its own supported power arrangement. The AC-1200R has no documented PoE output. This connection does not provide shared AirLive management, automatic mesh operation or guaranteed seamless roaming.
Technical Specifications
General
- Brand: AirLive
- Model / MPN: AC-1200R
- Product Type: Dual-band wireless router and access point
Processor and Memory
- Processor: MediaTek MT7620A
- Switch Chip: MediaTek MT7530W
- RAM: 64 MB
- Flash: 8 MB
Wireless
- Bands: Concurrent 2.4 GHz and 5 GHz
- Standards: IEEE 802.11a/b/g/n/ac
- Maximum Link Rates: 300 Mbps at 2.4 GHz; 866 Mbps at 5 GHz
- Channel Availability: Subject to regional regulations and device configuration
- Security: WPA-PSK, WPA2-PSK, WPA-RADIUS and 802.1X; legacy WEP
Ethernet
- LAN: 4 x 10/100/1000 Mbps Ethernet ports
- WAN: 1 x 10/100/1000 Mbps Ethernet port
Antenna
- Included Antennas: 2 detachable dual-band omnidirectional antennas
- Connector Designation: R-SMA, as specified by AirLive
Power
- Power Adapter Output: 12 V DC, 1 A
- PoE: Input and output support
Environmental
- Operating Temperature: 0 to 40 °C
- Storage Temperature: -20 to 60 °C
- Operating Humidity: 10 to 90%, non-condensing
Physical Specifications
- Dimensions: 30 x 157 x 127 mm (H x W x D),
- Weight: 305 g,
Certifications
- Manufacturer-Listed Certifications: CE, FCC
Included Parts
- AC-1200R main unit
- 12 V DC, 1 A power adapter
- 2 detachable dual-band omnidirectional antennas
- Quick installation guide and user-guide CD, as listed in the original installation guide
