PRODUCT SPECIFICATIONS
Model: C058900L132A
ePMP 2000 5GHz Access Point Lite with Intelligent Filtering and GPS Sync (FCC)
ePMP has set the standard for high performance, scalability, and reliability in harsh interference environments all at a compelling price. ePMP 2000 is the next-generation Access Point bringing interference tolerance to a whole new level with unique Hypure™ technology, which combines Intelligent Filtering and Smart Beamforming to deliver new levels of performance in the face of interference.
The ePMP 2000 System consists of a high-performance, GPS-Synchronized Access Point (AP) Radio with Intelligent Filtering, a new compact high-performance Sector Antenna, and an optional Smart Antenna. Intelligent Filtering improves both receive and transmit performance. It protects the network from off-channel interferers with a filter that dynamically moves around the channel. On the transmit side, it protects the RF environment by reducing off-channel transmission noise.
Smart Beamforming drastically reduces the effects of on-channel interference. The System learns the locations of each served Subscriber Module (SM) and forms a narrow bean toward the desired SM while that radio is transmitting in the uplink. This reduces the gain on the uplink for on-channel interferers that are transmitting at an azimuth angle different than the SM, delivering performance gains never before seen.
Key Advantages:
Industry-leading Interference Tolerance: Intelligent Filtering hardens ePMP 2000 to strong off-channel interferers and reduces off-channel noise for better radion co-location. Smart Beamforming with the optional Smart Antenna delivers dramatic performance improvements when dealing with strong co-channel interference.
Frequency Reuse: GPS Synchronization and Transmit Power Control allow for industry-leading frequency reuse.
Unmatched Performance and Scalability: With the efficient ePMP MAC protocol and advanced air-fairness scheduler, up to 120 simultaneously active Subscriber Modules can be served without performance degradation.
Key Specifications:
- Supports up to 10 Subscriber Modules
- Supports a wide frequency range: 5150-5970MHz
- 802.3at compliant 100/1000BaseT Interface
Product Specifications
Channel Spacing: Configurable on 5 MHz increments
Frequency Range: 5150 - 5970 MHz (exact frequencies as allowed by local regulations)
Channel Width: 5 | 10 | 20 | 40 MHz
MAC (Media Access Control) Layer: Cambium Proprietary and optionally standard 802.11n
Physical Layer: 2x2 MIMO/OFDM
Ethernet Interface: 100/1000BaseT, rate auto negotiated, 802.3at compliant
Powering Methods Supported: 56 V PoE (included), standard 802.3at PoE Supply, or CMM4 with 56 V and 5 pin to 7 pin cross over cable adapter
Nominal Receive Sensitivity (w/FEC) @ 20 MHz Channel: MCS0 = -93 dBm to MCS15 = -69 dBm (per branch)
Nominal Receive Sensitivity (w/FEC) @ 40 MHz Channel: MCS0 = -90 dBm to MCS15 = -66 dBm (per branch)
Modulation Levels (Adaptive): MCS0 (BPSK) to MCS15 (64QAM 5/6)
GPS Synchronization: Yes, via internal GPS or CMM4 with 56 V and 5 pin to 7 pin cross over cable adapter
Quality of Service: Three level priority (Voice, High, Low) with packet classification by DSCP, COS, VLAN ID, IP & MAC Address, Broadcast, Multicast and Station Priority
Antenna: Sector Antenna (C050900D021A) Availabile
Transmit Power Range: 0 to +30 dBm (combined, to regional EIRP limit) (1dB interval)
Sector Antenna Connection: 2 x 50 ohm, RP (Reverse Polarity) SMA
Beamforming Antenna Connection: 2 x 50 ohm, RP (Reverse Polarity) SMA, DC Coupled (powering antenna)
GPS Antenna Connection: 1 x 50 ohm, RP (Reverse Polarity) SMA
Surge Suppression: 1 Joule Integrated
Temperature: -30 C to +55 C (-22 F to +131 F)
Power Consumption: 20 W Maximum
Input Voltage: 44 V to 59 V
Weight: 0.7 kg (1.5 lbs) without brackets
Dimensions (L x W xH): 22.2 x 12.4 x 4.5 cm (8.75 x 4.9 x 1.75 in) without brackets
