Name: Cambium Networks cnMatrix EX2010-P MX-EX2010PxA-U Managed Gigabit PoE+ Switch, 8 RJ45 Ports, 2 SFP Uplinks, 100 W PoE Budget, US Power Cord
Brand: Cambium Networks
SKU: MX-EX2010PxA-U
Price: 656.77 USD
Availability: InStock

PRODUCT SPECIFICATIONS More Information

PRODUCT SPECIFICATIONS

Cambium Networks cnMatrix EX2010-P Managed Gigabit PoE+ Switch

The Cambium Networks cnMatrix EX2010-P, ordering SKU MX-EX2010PxA-U, combines eight Gigabit Ethernet PoE+ ports with two 1 Gbps SFP uplink slots. Its 100 W total PoE budget supports compatible access points, IP phones and cameras, while a fanless design suits indoor workspaces.

Layer 2 and Layer 3 capabilities support network segmentation and routing. Integration with cnMaestro provides centralized cloud or on-premises management, while zero-touch deployment and Policy-Based Automation simplify provisioning and device changes.

Key Features

Eight 10/100/1000 Mbps RJ45 ports with IEEE 802.3af/at PoE.
Two 1 Gbps SFP uplink slots.
100 W total PoE budget with up to 30 W per PoE+ port.
20 Gbps aggregate switching capacity.
Managed Layer 2 and Layer 3 functionality.
cnMaestro cloud or on-premises management.
Zero-touch deployment and Policy-Based Automation.
Fanless operation.
USA power cord included with this ordering SKU.

Ethernet and Fiber Connectivity

Connect wired endpoints through the eight Gigabit RJ45 ports and use supported SFP modules for uplinks. The two SFP slots operate at 1 Gbps; they are not 10 Gbps SFP+ ports.

PoE+ Power

Supply compatible IEEE 802.3af and 802.3at devices directly through Ethernet cabling. Plan connected loads within both the 30 W per-port limit and the shared 100 W budget. Eight simultaneous 30 W loads exceed the available power.

Network Management and Segmentation

Use VLANs, traffic prioritization and access controls to organize the network. Supported management methods include cnMaestro, a web interface, CLI, SSH and SNMP. Software features depend on the installed firmware and management platform.

Installation

The compact switch uses 100–240 V AC power and is intended for indoor installation. Rack mounting requires a separately purchased compatible kit.

Ideal Applications

Small enterprise and branch-office access networks.
PoE-powered wireless access point deployments.
IP phone and compatible surveillance-camera connectivity.
Segmented networks with Gigabit fiber uplinks.

Compatible Products

The EX2010-P supplies IEEE 802.3af/at PoE over its Gigabit RJ45 ports. Each powered device must remain within the port's capability, and the combined allocated power must fit the 100 W total budget.

Cambium Networks cnPilot e410 Indoor Access Point — PL-E410X00A-US – Supports standard IEEE 802.3af power and Gigabit Ethernet. Connect directly to a PoE-enabled switch port using suitable Ethernet cabling.

Technical Specifications

General

Brand: Cambium Networks
Series: cnMatrix EX2000
Model: EX2010-P
Ordering SKU / MPN: MX-EX2010PxA-U
Product Type: Managed Gigabit PoE+ Ethernet switch

Ethernet and Management Interfaces

Access Ports: 8 x RJ45 10/100/1000 Mbps
Uplink Slots: 2 x 1 Gbps SFP
Dedicated Management: Out-of-band Ethernet management port
Console: Serial console interface
USB: USB interface for supported file operations

PoE and Power

PoE Ports: 8
PoE Standards: IEEE 802.3af and IEEE 802.3at
Total PoE Budget: 100 W
Maximum PoE Output per Port: 30 W
Published PoE Voltage: 54 V
AC Input: 100–240 V AC
Published Switch Power with Traffic: 10.54 W, separate from the PoE output budget

Switching, Processor and Memory

Aggregate Switching Capacity: 20 Gbps
CPU Speed: 800 MHz
DRAM: 512 MB
Flash Storage: 128 MB
MAC Address Table: 16K entries
Simultaneous VLANs: 4K
QoS Queues: 8

Network Features

Layer 2: VLANs, spanning tree, LACP, LLDP/LLDP-MED and port mirroring
Layer 3: Inter-VLAN routing, static routes and DHCP relay
Security: Access control lists, 802.1X, DHCP snooping and dynamic ARP inspection
Management: cnMaestro, web interface, CLI, SSH and SNMP