PRODUCT SPECIFICATIONS
Model: PG-9171N
Comtrend PG-9171n G.hn Powerline Adapter with WiFi 802.11n
Bring superior wireless performance to your remote rooms via electrical wiring. Comtrend's PG-9171n is a G.hn-based powerline device with the added benefit of WiFi connectivity. Using existing electrical wiring and powerline technology, you can get WiFi connectivity to hard to reach locations without the weakened signal of a wireless extender. Easily add on to or create your G.hn Powerline Network-connect up to 16 G.hn Powerline Adapters.
PERFORMS BETTER THAN AN EXTENDER
- Extenders repeat an already weakened WiFi signal.
- Powerline adapters recreate the experience of a wired connection for better performance
Model: PG-9171N
Interface:
- RJ-45 X 1 for Ethernet connection
- Internal WiFi Antenna X 2
Ethernet:
- Standard IEEE 802.3
- 10/100 Mbps BaseT auto-sense
- Auto rate and duplex negotiation
- MDI/MDX support
- WLAN (WiFi)
- 802.11b/g/n WLAN (2.4GHz)
- 11 Channels (US, Canada)/ 13 Channels (Europe)
- WEP/WPA/WPA2
Modulations:
- OFDM, FEC, Flexible frequency configuration
- BPSK/QPSK/16-QAM/64-QAM for WiFI
- PHY Rate:
- Up to 300Mbps by WiFi transmission
Management:
- HTTP Web-based; Firmware upgrade via TFTP
- TR-069 Supported
Security:
- AES 128 Bits Encryption Ensures Total Data Security
- One Button Security Set-Up
- Configuration Button for Factory Reset
Networking Protocols:
- 802.1D Ethernet Bridge
- 802.1Q VLAN
- Quality of Service (QoS)
- IGMP (IPv4) Snooping & MLD (IPv6) Snooping
- Built-in dual TCP/IP stack (IPv4/IPv6)
Power:
- 110-240 VAC 50Hz/60Hz
- Support low power mode EuP Directive (Auto standby mode)
Environment Condition:
- Operating temperature: 32~104F (0~40°C)
- Relative Humidity: 8~95% (non-condensing)
Dimension:
- 3.66(H) X 1.50(W) X 2.32(D) in
- 93(H) X 38(W) X 59(D) mm
Certification:
- CE, FCC, ITU-T G.hn Standard
Note: Specifications are subject to change without notice.
techdescription >