PRODUCT SPECIFICATIONS
HL-1GC - Single Gigabit Port GPON ONU C+ transceiver with ROUTER and NAT
GPON Optical Network Termination products are designed for operators and service providers who seek advantage from the expanded capacity of a fiber access network.
HL-1GC is a GPON ONU that acts as GPON Demarcation Device and is designed to provide affordable access to FTTH networks for Business and Residential use. HL-1GC design guarantees multi-interoperability with a number of OLT vendors as well as with BBF.247 Interoperability test plan.
All products within the GPON family are compliant with current ITU-T standards for gigabit passive optical networks (GPONs). The solution is designed to optimize the deployment and roll-out of the service provider. The products use a single fiber to connect individual houses and businesses to the network for broadband services up to gigabit speeds.The flexible product design enables a variety of product features and available interfaces. All units have Layer 2 functionality by default. This includes advanced support for L2 VLAN’s, L2 QoS and Multicast IGMP as well as Router and NAT features in single unit.
The ONU products are tested and have proven interoperability with most major GPON OLT Vendors. HALNy specializes in cost-effective designs, and works closely with service providers to improve their business case through a comprehensive range of standard products, supporting the industry’s common demands. HALNy also provides custom designs and services to meet unique customer needs. The network interface is compliant with ITU-T G.984.5 to provide 2.5 Gb/s downstream and 1.25 Gb/s upstream. LAN interface provides Gigabit service.
HALNy specializes in cost-effective designs, and works closely with service providers to improve their business case through a comprehensive range of standard products, supporting the industry’s common demands. HALNy also provides custom designs and services to meet unique customer needs.
Dimension
- 92 x 92 x 24mm
Technical Description
- HL-1GC
- HARDWARE SPECIFICATION
- WAN Port: GPON SC/APC C+ 2.488Gbps Downstream 1.244Gbps Upstream
- Operating Temp: 0 ~ 45 C
- Storage Temp: -20 ~ 70 C
- GPON RX Input: -10 ~ -27 dBm
- GPON TX Output: 3 ~ 7 dBm
- Flash: Hold two software sets, for active and backup ONU firmware
- LAN Ports: 1x10/100/1000 Base-T Auto-sensing, auto-detection MDI/ MDI-X
- LED: POWER, PON, LOS, LAN
- Power Supply: DC +12V 0.5A (feed via external AC/DC adapter)
- Buttons: ON/OFF, Reset
- Maximum Power Consumption: 2.8W
- SOFTWARE SPECIFICATION
- GPON:
- ITU-T G.984.x and G.988
- OMCI G.984.4
- AES decryption
- Support for FEC (Forrward Error Correction) in both direction
- Dying Gasp / Power Off notification
- Dynamic Bandwidth Allocation
- Support for Multicast GEM
- L2:
- 802.1D Bridge
- VLAN 802.1Q with 802.1p CoS
- IGMP Snooping v/1v2/v3
- Jumbo Frame 2K on GPON WAN
- Rate-Limit (Traffic Limitation)
- L3:
- ONU can works as Residential Gateway (Home Gateway Unit: HGU) and in Bridge (SFU)
- PPPoE Client
- NAT and PAT
- DHCP Server/Client/Relay
- IGMP Proxy
- VPN Pass-through
- UPnP
- Port Forrwarding
- IPv4/IPv6
- Provisioning:
- Easy to use provisioning for all services including PPPoE login, IPTV, Port Forrwarding, Logins etc
- DOCSIS like provisioning over GPON/EPON
- TR-069
- SNMP
- OMCI
- RestAPI / JSON
- Managment:
- WEB
- Remote Syslog
- OMCI
- GPON:
- HARDWARE SPECIFICATION
