PRODUCT SPECIFICATIONS
Intellinet 560849 16-Port Fast Ethernet PoE+ Rackmount Switch
The Intellinet 560849 combines 16 Fast Ethernet connections with IEEE 802.3af/at Power over Ethernet. It supplies network data and power to compatible IP phones, cameras, and wireless access points through Ethernet cabling.
Designed for straightforward installation, this unmanaged switch requires no software configuration. Its 240 W shared PoE budget supports mixed device deployments, with up to 30 W available from an individual port when sufficient budget remains.
Key Features
- 16 RJ-45 ports supporting 10/100 Mbps Ethernet.
- IEEE 802.3af PoE and IEEE 802.3at PoE+ output.
- 240 W total shared PoE power budget.
- Up to 30 W output per port, subject to the shared budget.
- Automatic link-speed negotiation and Auto-MDI/MDI-X.
- Store-and-forward switching and IEEE 802.3x flow control.
- Metal 1U enclosure for 19-inch rack installation.
Fast Ethernet Connectivity
Every network port supports 10 or 100 Mbps. All connections, including a connection used to reach another switch or router, operate within this limit. Select this model when Fast Ethernet meets the bandwidth requirements of the installation.
PoE Power Planning
The 240 W budget is shared across all powered devices. It does not provide 30 W simultaneously on all 16 ports. Dividing the budget equally gives an average allocation of 15 W per port at the switch output; individual device requirements and cable losses must also be considered.
Installation and Monitoring
The switch includes rackmount brackets and a power cable. Front-panel indicators show power, network activity, and PoE status. An internal fan provides cooling.
Ideal Applications
- Compatible PoE IP camera installations.
- VoIP phone networks using Fast Ethernet.
- Compatible wireless access points where 100 Mbps connectivity is sufficient.
- Unmanaged networks requiring centralized PoE power.
Compatible Products
Powered equipment must support IEEE 802.3af or IEEE 802.3at PoE, remain within the switch’s per-port and total power limits, and support a 10/100 Mbps Ethernet connection.
- Grandstream GXP1625 IP Phone – Standards-based power and Ethernet compatibility: the phone specifies IEEE 802.3af Class 2 PoE and auto-sensing 10/100 Mbps network ports. Connect the switch to the phone’s PoE-capable network input.
Power limitations: Do not connect devices requiring passive 24 V PoE or higher-power 802.3bt service unless an independently verified conversion solution is used. For every installation, account for startup demand, cable losses, and the combined PoE load.
Technical Specifications
General
- Brand: Intellinet Network Solutions
- Model / MPN: 560849
- Product Type: Unmanaged Fast Ethernet PoE+ switch
Ethernet Interfaces
- Ports: 16 × RJ-45
- Data Rates: 10/100 Mbps
- Auto-Negotiation: Supported
- Auto-MDI/MDI-X: Supported on all ports
- Duplex: Full and half duplex
- SFP / SFP+ Slots: None
- Dedicated Additional Uplink Ports: None
Switching
- Architecture: Store-and-forward
- Backplane Speed: 3.2 Gbps
- MAC Address Table: 4,096 entries
- Flow Control: IEEE 802.3x full-duplex flow control; half-duplex backpressure
PoE
- PoE Output Ports: 16
- Standards: IEEE 802.3af and IEEE 802.3at
- PSE Type: Endspan
- Maximum Output per Port: 30 W
- Total Shared PoE Budget: 240 W
- Protection: Short-circuit, overload, and high-voltage protection
AC Power
- Input: 100–240 V AC, 50–60 Hz
- Maximum Power Consumption: 250 W
Physical Specifications
- Housing: Metal
- Rack Format: 19-inch, 1U
- Dimensions, W × D × H: 440 × 220 × 44 mm
- Weight: 3.1 kg
- Cooling: Internal fan
Environmental
- Operating Temperature: 0°C to 45°C
- Storage Temperature: -20°C to 80°C
- Operating Humidity: 10% to 90% RH, non-condensing
Compliance
- FCC Class A.
- CE.
Included Parts
- 16-Port Fast Ethernet PoE+ Switch.
- 19-inch rackmount brackets.
- Power cable.
- User manual.
Download Intellinet 560849 16-Port Fast Ethernet PoE+ Switch Datasheet (PDF)
