PRODUCT SPECIFICATIONS
Intellinet 561488 2-Port Gigabit Ultra PoE Injector
The Intellinet 561488 adds power delivery for two compatible Ethernet devices through one network uplink. It provides an 80 W total PoE budget, allocated as up to 50 W on port P1 and up to 30 W on port P2.
Use it to connect suitable PoE equipment to a network without replacing the existing non-PoE switch. Its integrated switching functionality carries traffic between the uplink and connected devices.
Key Features
- Three Gigabit RJ45 ports: one data uplink and two PoE outputs.
- Support for IEEE 802.3af and IEEE 802.3at powered devices.
- Internal AC power supply.
- Short-circuit, over-current and over-voltage protection.
- Fanless housing with desktop or wall placement options.
Installation
Connect P3 to the network switch and the powered devices to P1 and P2. Use Cat5e or better Ethernet cabling and connect the grounding terminal as directed in the installation guide.
Power Compatibility
Observe each output's individual limit. The 50 W rating requires confirmation that the intended device supports this injector's power-delivery implementation; it does not establish IEEE 802.3bt compatibility.
Ideal Applications
- Adding PoE access points, IP phones or cameras to an existing network.
- Small installations requiring two powered Ethernet connections.
- Compatible IoT equipment with verified power requirements.
Compatible Products
Standard PoE applications require an IEEE 802.3af or IEEE 802.3at powered device operating within the selected port's available power. Check hardware revision, startup demand and cable losses when selecting equipment.
- TP-Link EAP225 V3 Omada AC1350 Gigabit Access Point – supports IEEE 802.3af/at input and has a published maximum US consumption of 12.6 W. Use the injector's P2 output for the standard PoE connection.
Important: This recommendation applies to EAP225 V3 with its documented active PoE input. Confirm the supplied hardware revision. Do not interpret this injector as a 24 V passive PoE supply or assume that its “Ultra PoE” designation guarantees support for IEEE 802.3bt-only devices.
Technical Specifications
General
- Brand: Intellinet Network Solutions
- Model / MPN: 561488
- Additional Model Reference: IPI-2G80
- Product Type: PoE injector with switching capabilities
Ethernet Interfaces
- Total Ports: Three RJ45
- P1: 10/100/1000 Mbps data and PoE output, up to 50 W
- P2: 10/100/1000 Mbps data and PoE output, up to 30 W
- P3: 10/100/1000 Mbps data uplink
- Installation Cabling: Cat5e minimum
- Published Connection Distance: Up to 100 m
PoE and Power
- Declared PoE Standards: IEEE 802.3af and IEEE 802.3at
- Total PoE Budget: 80 W
- AC Input: 100–240 VAC, 50–60 Hz
- Power Supply: Internal
- Protection: Short circuit, over-current and over-voltage
Switching
- Architecture: Store-and-forward
- MAC Address Table: 2K entries
- MAC Functions: Learning and aging
- Published Backplane Capacity: 6 Gbps
Physical and Environmental
- Housing: Plastic
- Cooling: Fanless
- Placement: Desktop or wall mounting
- Dimensions: 190 x 100 x 40 mm (L x W x H)
- Weight: 0.416 kg
- Operating Temperature: 0 to 40°C
- Storage Temperature: -40 to 70°C
- Operating Humidity: 10–90% RH, non-condensing
Certifications Listed
- CE
- RoHS
- FCC Class A
Included Parts
- PoE injector
- Power cable
- Instructions
