PRODUCT SPECIFICATIONS
L-com HG5417P-090 5.4 GHz 17 dBi 90° Sector Panel Antenna
The L-com HG5417P-090 is an outdoor sector panel antenna for wireless service-provider sites and fixed wireless networks. Its 17 dBi gain and 90° horizontal coverage provide directional coverage across a defined service area.
Designed for the 5.4 GHz band, this antenna operates from 5.470 to 5.725 GHz. It uses vertical polarization and an integral N-female RF connector for connection to suitable external-antenna radio equipment.
Key Features
- 17 dBi antenna gain.
- 90° horizontal and 8° vertical beamwidth.
- Single vertical polarization.
- 50-ohm RF impedance.
- Integral N-female connector.
- Outdoor radome and adjustable mast-mount hardware.
Sector Coverage and Alignment
The sector pattern concentrates coverage in a selected direction. Adjustable mounting helps installers aim the antenna toward the intended service area. Coverage distance depends on the complete radio link, installation height, obstructions and interference.
RF Connectivity
Select the radio and feed cable for operation within the antenna's specified frequency range. The antenna-side cable connector must mate with its standard N-female connector, while the other cable end must match the radio.
Outdoor Design
The weather-resistant enclosure is intended for outdoor installations. The supplied tilt-and-swivel mast mount supports alignment during installation. Weatherproof exposed RF connections and follow appropriate grounding practices.
Ideal Applications
- Wireless Internet service-provider sector coverage.
- Radio local area networks using suitable external-antenna radios.
- Fixed wireless access within the specified operating band.
Compatible Products
- Radio requirements: Supported operating channels within 5.470–5.725 GHz, a suitable 50-ohm external RF interface, and support for the intended single-polarization antenna configuration.
- Feed-cable requirements: A 50-ohm cable assembly rated for the operating frequency, with a standard N-male connector at the antenna and the correct connector at the radio.
- Mounting requirements: A suitable mast and installation structure within the supplied mounting hardware's limits.
Important: This is a single-feed, vertically polarized antenna. It does not provide two independent RF feeds for a dual-polarized 2x2 MIMO installation. A matching connector alone does not establish radio compatibility. Account for feed-cable loss, radio output power and permitted system EIRP when designing the installation.
Technical Specifications
General
- Brand: L-com
- Model / MPN: HG5417P-090
- Product Type: Outdoor sector panel antenna
Antenna and RF
- Frequency Range: 5470–5725 MHz (5.470–5.725 GHz)
- Gain: 17 dBi
- Polarization: Vertical
- Horizontal Beamwidth: 90°
- Vertical Beamwidth: 8°
- Impedance: 50 ohms
- RF Connector: 1 x integral N-female
- Maximum RF Input Power: 100 W
- Front-to-Back Ratio: Greater than 25 dB
- VSWR: Less than 1.5:1 average
- Lightning Protection Design: DC ground
Physical and Environmental
- Radome Material: UV-resistant PVC
- Listed Weight: 1.97 kg (4.35 lb)
- Operating Temperature: -40 to +85°C (-40 to +185°F)
- Maximum Mounting Pipe Outside Diameter: 50.8 mm (2 in.)
- Mechanical Downtilt: Adjustable from 0° to 20°
Compliance
- RoHS
Included Parts
- HG5417P-090 sector panel antenna
- Tilt-and-swivel mast-mount kit with mounting hardware
Download L-com HG5417P-090 5.4 GHz Sector Panel Antenna Datasheet (PDF)
