PRODUCT SPECIFICATIONS
SKU: RB4011iGS+5HacQ2HnD-IN - Powerful 10xGigabit port router with a Quad-core 1.4Ghz CPU, 1GB RAM, SFP+ 10Gbps cage, dual band 2.4GHz / 5GHz 4x4 MIMO 802.11a/b/g/n/ac wireless and desktop case.
RB4011 series - amazingly powerful routers with ten Gigabit ports, SFP+ 10Gbps interface and IPsec hardware acceleration for a great price!
The RB4011 uses a quad core Cortex A15 CPU, same as in our carrier grade RB1100AHx4 unit. The unit is equipped with 1GB of RAM, can provide PoE output on port #10 and comes with a compact and professional looking solid metal enclosure in matte black.
RB4011iGS+5HacQ2HnD-IN (WiFi model) is dual band, four chain unit with a supported data rate of up to 1733 Mbps in 5GHz. For legacy devices, the unit also has a dual chain 2GHz wireless card installed in miniPCI-e slot.
RB4011iGS+5HacQ2HnD-IN (International) supports 2412-2484MHz and 5150MHz-5875MHz range (Specific frequency range can be limited by country regulations).
Note: Passive DAC (MikroTik S+DA0001/S+DA0003) are not supported
Technical Description
- Specifications
- Product code: RB4011iGS+5HacQ2HnD-IN
- Architecture: ARM 32bit
- CPU: AL21400
- CPU core count: 4
- CPU nominal frequency: auto (533 - 1900) MHz
- Switch chip model: RTL8367SB
- Dimensions: 228 x 120 x 30 mm
- RouterOS license: 5
- Operating System: RouterOS v7
- Size of RAM: 1 GB
- Storage size: 512 MB
- Storage type: NAND
- MTBF: Approximately 200'000 hours at 25C
- Tested ambient temperature: -40°C to 45°C
- IPsec hardware acceleration: Yes
- Wireless capabilities
- Wireless 5 GHz Max data rate: 1733 Mbit/s
- Wireless 5 GHz number of chains: 4
- Wireless 5 GHz standards: 802.11a/n/ac
- Antenna gain dBi for 5 GHz: 3
- Wireless 5 GHz chip model: QCA9984
- Wireless 5 GHz generation: Wi-Fi 5
- Wireless 2.4 GHz Max data rate: 300 Mbit/s
- Wireless 2.4 GHz number of chains: 2
- Wireless 2.4 GHz standards: 802.11b/g/n
- Antenna gain dBi for 2.4 GHz: 3
- Wireless 2.4 GHz chip model: R11e-2HnD
- Wireless 2.4 GHz generation: Wi-Fi 4
- WiFi speed: AC2000
- Ethernet
- 10/100/1000 Ethernet ports: 10
- Fiber
- SFP+ ports: 1
- Peripherals
- MiniPCI-e slots: 1
- Serial console port: RJ45
- Powering
- Number of DC inputs: 2 (PoE-IN, DC jack)
- DC jack input Voltage: 12-57 V
- Max power consumption: 44 W
- Max power consumption without attachments: 23 W
- Cooling type: Passive
- PoE in: Passive PoE
- PoE in input Voltage: 18-57 V
- PoE-out
- PoE-out ports: Ether10
- PoE out: Passive PoE up to 57V
- Max out per port output (input 18-30 V): 600 mA
- Max out per port output (input 30-57 V): 420 mA
- Max total out (A): 600 mA
- Certification & Approvals
- Certification: CE, FCC, IC, EAC, ROHS
- IP: IP20
- Other
- PCB temperature monitor: Yes
- Voltage Monitor: Yes
