PRODUCT SPECIFICATIONS
RB4011 series - amazingly powerful routers with ten Gigabit ports, SFP+ 10Gbps interface and IPsec hardware acceleration.
The RB4011 uses a quad core Cortex A15 CPU, same as in our carrier grade RB1100AHx4 unit. The unit is equipped with 1GB of RAM, can provide PoE output on port #10 and comes with a compact and professional looking solid metal enclosure in matte black.
RB4011iGS+5HacQ2HnD-IN (WiFi model) is dual band, four chain unit with a supported data rate of up to 1733 Mbps in 5GHz. For legacy devices, the unit also has a dual chain 2GHz wireless card installed in miniPCI-e slot.
Note: The RB4011 does not support Passive DAC modules, 1GB copper SFP modules and SFP GPON modules.
Technical Description
- Product code: RB4011iGS+5HacQ2HnD-IN
- CPU: 4 core AL21400 1.4 GHz
- Size of RAM: 1 GB
- Storage NAND: 512 MB
- 10/100/1000 Ethernet ports: 10
- SFP+ port: 1
- Switch chip model: RTL8367SB
- Wireless
- 2.4 GHz radio
- 5 GHz radio
- Wireless regulations Specific frequency range may be limited by country regulations
- Operating frequency
- 2.4 GHz
- 2412 - 2484 MHz
- 5 GHz
- 5150 - 5875 MHz
- 2.4 GHz
- Wireless interface model
- 2.4 GHz
- R11e-2HnD
- 5 GHz
- QCA-9984
- 2.4 GHz
- Supported protocol
- 2.4 GHz
- 802.11b/g/n
- 5 GHz
- 802.11a/n/ac
- 2.4 GHz
- Chains: 2 4
- Antenna beam width: 360°
- Antenna gain: 3 dBi (2 antennas dual band, 2 antennas single 5 GHz band)
- Power Jack: 1
- PoE in: Yes (port 1), passive, 18 - 57 V
- PoE out: Yes (port 10), passive, up to 57 V
- Max power consumption: 23 W without PoE out, 44 W with PoE out
- Supported input voltage: 12 V - 57 V (jack)
- Voltage Monitor: Yes
- PCB temperature monitor: Yes
- Operating temperature: -40 C ~ +45 C
- Dimensions: 228 x 120 x 30 mm
- Serial port: RJ45
- License level: 5
- Operating System: RouterOS
More Information
MFRPartNum:
RB4011iGS+5HacQ2HnD-IN-US
Datasheet: