PRODUCT SPECIFICATIONS
The BaseBox 6 in an outdoor wireless device, based on our popular RB912 model, fitted with two SMA connectors for antennas, and a cable hood for protection against moisture. Also available are three additional places for antenna connectors, in case you wish to use the BaseBox miniPCIe slot for one more wireless interface to make a dual band device, or a 3G/4G modem.
Designed to use as an 6GHz AP with our 6GHz CPEs, like DynaDish 6 and SXT 6.
IMPORTANT! Product is available for 5.9-6.4GHz license holders only, you would need to show your license to Distributor to be able to place your order.
This product is not suitable for unlicensed ISM bands. Device use is subject to country regulations. Availability might be limited depending on distributor stock and country regulations.
Technical Description
- Specifications
- Product code: RB912UAG-6HPnD-OUT
- Architecture: MIPSBE
- CPU: AR9342
- CPU core count: 1
- CPU nominal frequency: 600 MHz
- Dimensions: 246 x 135 x 50 mm
- RouterOS license: 4
- Operating System: RouterOS
- Size of RAM: 64 MB
- Storage size: 128 MB
- Storage type: NAND
- MTBF: Approximately 100'000 hours at 25C
- Tested ambient temperature: -40°C to 70°C
- Powering
- Number of DC inputs: 1 (PoE-IN)
- Max power consumption: 23 W
- Max power consumption without attachments: 12 W
- Cooling type: Passive
- PoE in: Passive PoE
- PoE in input Voltage: 10-30 V
- Wireless specifications
- Wireless 6 GHz Max data rate: 300 Mbit/s
- Wireless 6 GHz number of chains: 2
- Wireless 6 GHz standards: 802.11a/n
- Wireless 6 GHz chip model: AR9342
- Wireless 6 GHz generation: Wi-Fi 4
- Ethernet
- 10/100/1000 Ethernet ports: 1
- Peripherals
- Number of SIM slots; 1 Modem (Mini SIM)
- MiniPCI-e slots: 1
- Number of USB ports: 1
- USB Power Reset: Yes
- USB slot type: USB type A
- Max USB current (A): 1
- Other
- PCB temperature monitor: Yes
- Voltage Monitor: Yes
- Beeper: Yes
