PRODUCT SPECIFICATIONS
The wAP is a small weatherproof wireless access point for your mobile devices - perfect for installation outside your house, in the garden, on your porch or anywhere else where you need wireless access from your phone or computer.
The device has one 10/100 Ethernet port, it supports 802.11b/g/n wireless standards. It looks unobtrusive and sleek, available in two colours - black (RBwAP2nD-BE) and white (RBwAP2nD).
The wAP is weatherproof and can be fixed to any external wall from the inside of the case - so that it is securely attached to it's mounting location. The bottom door can also be secured with a special screw, which can only be opened by the owner.
It is also possible to run the Ethernet cable directly behind the unit, to inside the wall, there is a special opening on the back of the case. This way, the unit doesn’t attract attention and blends into any environment.
Technical Description
- Specifications
- Product code RBwAP2nD
- Architecture MIPSBE
- CPU QCA9533
- CPU core count 1
- CPU nominal frequency 650 MHz
- Dimensions 185 x 85 x 30 mm
- RouterOS license 4
- Operating System RouterOS
- Size of RAM 64 MB
- Storage size 16 MB
- Storage type FLASH
- MTBF Approximately 100'000 hours at 25C
- Tested ambient temperature -40C to +70C
- Wireless capabilities
- Wireless 2.4 GHz Max data rate 300 Mbit/s
- Wireless 2.4 GHz number of chains 2
- Wireless 2.4 GHz standards 802.11b/g/n
- Antenna gain dBi for 2.4 GHz 2
- Wireless 2.4 GHz chip model QCA9533
- Wireless 2.4 GHz generation Wi-Fi 4
- Ethernet
- 10/100 Ethernet ports 1
- Powering
- Number of DC inputs 2 (DC jack, PoE-IN)
- DC jack input Voltage 11-57 V
- Max power consumption 4 W
- PoE in 802.3af/at
- PoE in input Voltage 11-57 V
- Certification & Approvals
- Certification FCC, IC
- IP IP20